Subscribe to Our Youtube Channel
Summary of Contents for WiT BLE 5.0
- Page 1 USER MANUAL BLE 5.0 Adapter BLE 5.0 Adapter | manual v0722 | http://wiki.wit-motion.com/english - 1 -...
-
Page 2: Tutorial Link
Google Drive Github Notice: BLE 5.0 adapter is an accessory only designed for WitMotion Bluetooth 5.0 sensor’s connection with PC, including WT901BLE, WT901BLECL. Its usage will be based on the sensor’s operation. For more details, there will be a Chapter BLE 5.0 Adapter connection shown in the manual of the corresponding model you bought. -
Page 3: Table Of Contents
2.1 Parameter ..............- 5 - 2.2 Size ................. - 6 - 3 Using Method ............... - 7 - 3.1 Driver Installation ............. - 7 - 3.2 Check Port Number ..........- 9 - BLE 5.0 Adapter | manual v0722 | http://wiki.wit-motion.com/english - 3 -... -
Page 4: Description
Description BLE 5.0 adapter is an accessory only designed for WITMOTION WT901BLECL BLE 5.0 sensor’s connection with PC ● Built-in CP2102 chip ● Anti-dust, cap-design ● USB specification 2.0 ● Support the wireless distance up to 30m ● Compatible with 3.3V/5V voltage input ●... -
Page 5: Specification
Specification Parameter Parameter Specification Input voltage 3.3V-5V Current <500mA 19*13*3mm Size Baud rate 115200 Chip NRF52832 Bluetooth range 30 meters BLE 5.0 Adapter | manual v0722 | http://wiki.wit-motion.com/english - 5 -... -
Page 6: Size
Size BLE 5.0 Adapter | manual v0722 | http://wiki.wit-motion.com/english - 6 -... -
Page 7: Using Method
For 64 bit system, please install CP210xVCPInstaller_x64.exe Link to CP2102 Driver Step 1. Download the driver from below link Silicon Usb-to-uart-bridge-vcp-drivers Step 2. Unzip the file and run the installer depending to your computer type BLE 5.0 Adapter | manual v0722 | http://wiki.wit-motion.com/english - 7 -... - Page 8 Step 3. Install the driver by following the steps. BLE 5.0 Adapter | manual v0722 | http://wiki.wit-motion.com/english - 8 -...
-
Page 9: Check Port Number
Check Port Number Right click my computer\management\Device manager\Port（COM&LPT）. You can see the generated port number, the port number is COM3. BLE 5.0 Adapter | manual v0722 | http://wiki.wit-motion.com/english - 9 -... - Page 10 3 is changed to serial port 4, the operation steps are as follows: Step 1: Open device manager, right-click on CP102 USB to UART Bridge Controller and select “Properties”. BLE 5.0 Adapter | manual v0722 | http://wiki.wit-motion.com/english - 10 -...
- Page 11 Step 2: Click on Port Settings, then click on "Advanced Settings". Step 3: Change the COM port and click OK. BLE 5.0 Adapter | manual v0722 | http://wiki.wit-motion.com/english - 11 -...
Need help?
Do you have a question about the BLE 5.0 and is the answer not in the manual?
Questions and answers
How to install the BLE 5.0 WIT Motion adapter
To install the WiT BLE 5.0 Motion adapter, follow these steps:
1. Download the Driver:
- For a 32-bit system, download and install `CP210xVCPInstaller_x86.exe`.
- For a 64-bit system, download and install `CP210xVCPInstaller_x64.exe`.
2. Unzip and Run the Installer:
- Extract the downloaded file and run the appropriate installer based on your computer type.
3. Install the Driver:
- Follow the on-screen instructions to complete the installation.
4. Check the Port Number:
- Right-click on "My Computer" and go to Management > Device Manager > Ports (COM & LPT).
- Locate the generated port number (e.g., COM3).
5. (Optional) Change the Port Number:
- If multiple USB serial modules are connected, you can manually adjust the port number.
This process ensures the adapter is properly installed and recognized by the system.
This answer is automatically generated