Page 1
Setup your Vistacam 1000 wirelessly Mounting and installation 1. Mount the VistaCam 1000 on its stand 2. Put one end of the AC power adapter through the plastic cap 3. Put the rubber grommet over the AC power adapter to ensure that the connection is waterproof 4.
Page 2
5. Connect the other end of the AC power adapter to a power outlet within 3 feet of your Vera controller 6. The green power LED light will be solid for 15 seconds and then it will start blinking Note: Please ensure that the camera is paired to your network before permanent mounting...
Page 3
Wireless Setup Firmly press the square WPS button once, located on the back of the VistaCam 1000 1. The Network LED will begin blinking amber indicating the pairing process has started 2. Press the Select button, until the Wi-Fi LED blinks 3.