Vera Vistacam 700 Install And Setup page 3

NOTE: The LED will first turn on and then start blinking. It will blink during startup, which
will take about a minute. After the startup is completed, the green LED should remain
ON.
Mounting and Installation
NOTE: Please ensure that the Wireless Full HD IP Camera is configured and added to the
network before mounting it.
1. Identify the location for mounting the Vistacam 700 Camera
2. Place the camera in the desired position on the wall/ceiling. Screw the two screws into
the wall through the holes of the stand
3. Firmly connect the AC Power Adapter to the VistaCam 700 Power Connection and
then plug it into an AC outlet.