ABB PrimEvo SM100E Instruction Leaflet

TECHNICAL INFORMATION
Input Charge Discharge
Model Number
Voltage
Duration Duration
220-240V~
24h
PrimEvo SM100E
50Hz
Maintained and Non-Maintained function
N
NEUTRAL
SL
SWITCH LIVE
L
PERMANENT LIVE
Explanations
Photometric
Narrow lens
4 of 4
Battery
Operation Power
Maintained
M:4.8W
3 h Ni-Cd,3.6V 1000mA
Non-maintained
NM:1.5W
Maintained Operational:
Connect L,N and leave Jump cable connected.
For switchable Maintained Operational:
Connect L,N and remove Jump cable,
Jump cable
Connect switch live to terminal indicated.
Non maintained Operational:
Connect L,N and remove Jump cable
PrimEvo SM100E
Instruction Leaflet
ABB B.V
Bruntcliffe Lane
Morley, Leeds
W.Yorkshire LS27 9LL, United Kingdom
Telephone +44 (0) 113 281 0600
Sales +44 (0) 113 281 0610
Fax +44 (0) 113 281 0601
Email LV.enquiries@gb.abb.com
Technical Specifications
Power Supply : 220-240VAC, 50 Hz
Power Consumption : Max. 4.8W
Operation : Maintained or Non-maintained
Function : Manual test
Duration : Discharge 1H or 3H
Charge time : 24h
Protection grade : IP20
Emergency lumens output : 3H/120lm
Light distribution : Path way (Standard)
Ta 0°...+45°
Note: We reserve the right to make technical changes or modify
the contents of this document without prior notice. With regard to
purchase orders and/or contracts, the agreed particulars
shall prevail. ABB does not accept any responsibility whatsoever for
potential errors or possible lack of information in this document.
We reserve all rights in this document and in the subject matter
and illustrations contained therein. Any reproduction, disclosure
to third parties or utilisation of its contents - in whole or in parts -
is forbidden without prior written consent of ABB.
Copyright © 2017 ABB
All rights reserved
?45mm 55mm
1 of 4