Page 1
20V 1.5AH/2.0AH/4.0AH BATTERY MODEL HCBT015/HCBT020/HCBT040 ATTACH YOUR RECEIPT HERE Serial Number _____________________ Purchase Date ______________________ Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-877-888-1880, 8:30 a.m. – 8:00 p.m. EST (Monday – Friday) & 10:00 a.m. – 6:00 p.m. EST (Saturday and Sunday).
Please read and understand this entire manual before attempting to assemble or operate this product. If you have any questions regarding the product, please call Hammerhead customer service at 1-877-888-1880, 8:30 a.m. – 8:00 p.m. EST (Monday – Friday) &...
IMPORTANT: This tool should only be serviced only by a qualified service technician. IMPORANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS-This manual contains important safety and operating instructions for batteries MODEL HCBT015/HCBT020/HCBT040. DANGER To reduce the risk of fire or electric shock, carefully follow these operating instructions.
Page 5
SAFETY INFORMATION Work area safety • Keep work area clean and well lit. Cluttered or dark areas invite accidents. • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
Page 6
SAFETY INFORMATION Specific Safety Rules • Before using battery, read all instructions and cautionary markings on (1) battery charger, (2) battery pack, and (3) product using battery. • Risk of fire and burns. Do not recharge, disassemble, heat above 100 °C(212 °F), or incinerate.
SAFETY INFORMATION • Replace battery pack if a substantial drop in operating time per charge is observed. Battery pack may be nearing the end of its life. PREPARATION Before attempting to use the battery, familiarize yourself with all of its operating features and safety requirements.
OPERATING INSTRUCTIONS WARNING To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse your charger or battery pack in fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach-containing products, etc, can cause a short circuit.
Page 10
OPERATING INSTRUCTIONS 2. Low Capacity Warning If one LED on the power indicator begins to flash, the battery pack’s charge is under 20% capacity and should be recharged.Unlike other types of battery packs, lithium-ion battery packs deliver fadefree power for their entire run time. The tool will not experience a slow, gradual loss of power as it is used.
Page 11
OPERATING INSTRUCTIONS 5. To Charge The Battery Pack NOTICE: This lithium-ion battery pack is shipped partially charged. Before using it the first time, fully charge the battery pack. Attach a. Always charge the battery pack with Detach the correct charger. b.
CARE AND MAINTENANCE Service WARNING: Preventive maintenance performed by unauthorized personnel may result in misplacing of internal wires and components which could cause serious hazard. Please contact customer service or an authorized service center for assistance. General Maintenance WARNING: When servicing, use only identical replacement parts. Use of any other parts could create a hazard or cause product damage.
Battery pack will not Defective charger Have the charger serviced charge by Hammerhead customer service. Defective battery pack. Have the battery pack serviced by Hammerhead customer service 20V 1.5AH/2.0AH/4.0AH BATTERY...
This battery is warranted to the original purchaser from the original purchase date for 12 Months, Hammerhead consumer portable power tool models will be free from defects in material or workmanship for a period of ninety days if the tool is used for professional use.