Burnside P350 Quick Start Manual

Burnside Telecom Limited
Burnside House, Isington, Alton
GU34 4PP, United Kingdom
Memory buttons
Use to store regular
contacts for quick
dialling.
The standby screen
When the P350 is not involved in a call or any other operation, it will display a
screen similar to the one below which indicates the network name as well as the
time, date, signal strength and other status icons.
Tel: +44 (0)8700 76276
Fax: +44 (0)1420 520029
Email: info@burnsidetelecom.com
Arrow keys Select Menu
Use to Use to Press to
control choose display
menu menu the setup
options. options. menu.
Handsfree
Press to begin
handsfree dialling or
to answer an incom-
ing call without pick-
ing up the handset.
BURNSIDE
www.burnsidetelecom.com
This quick start guide will help you to set up, switch on and begin using your
P350 desktop mobile phone. For further information, please refer to the full
user guide supplied with the product.
Setting up
Unlock the transit switch
When shipped, your P350 is locked for
transit to prevent it from powering on
accidentally. You need to unlock the
phone before it will operate.
1 On the underside of the P350, locate
the recessed switch near to where
the handset cable attaches.
2 Slide the switch towards the rear of
the P350 unit.
The P350 will not switch on at this
stage.
P350 desktop mobile phone
quick start guide
Transit
switch
Install your SIM card
Note: Ensure the T350 is switched off.
1 On the rear panel of the P350, carefully
swing open the SIM slot door.
2 Orientate your SIM card with its contacts
facing downwards and the notched cor-
ner facing towards the slot.
3 Push the SIM card into the slot until it
clicks into place. Close the door.
Note: To remove the SIM card, press it
inwards to release and partially eject it.
Then slide it out of the slot.