Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2021 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
21k
Advertisement
Table of Contents
Summary of Contents for QUINN 58594
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Important Safety Information
If unreadable or missing, contact Harbor Freight Tools for a replacement. 6. Before cutting, make sure the cutting bed is clean and clear of debris. For technical questions, please call 1-888-866-5797. Page 2 ITEM 58594... -
Page 3: Assembly Instruction
• Use quick downward pressure • Use a sturdy workbench, or to break the tile. place the machine on the floor to increase your leverage. For technical questions, please call 1-888-866-5797. ITEM 58594 Page 3... -
Page 4: Making A Straight Cut
Breaker Note: Good results require applying proper pressure and scoring the tile properly. 9. Remove tile pieces from the Tile Cutter. This depends largely upon the operator and requires practice. For technical questions, please call 1-888-866-5797. Page 4 ITEM 58594... - Page 5 Handle to break tile. 5. Loosen the Knob and set the Angle 9. Remove tile pieces from the Tile Cutter. Guide against the edge of the tile. For technical questions, please call 1-888-866-5797. ITEM 58594 Page 5...
-
Page 6: Parts List And Assembly Diagram
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175442017 when ordering parts. For technical questions, please call 1-888-866-5797. Page 6 ITEM 58594... -
Page 7: Assembly Diagram
Assembly Diagram For technical questions, please call 1-888-866-5797. ITEM 58594 Page 7... -
Page 8: Limited 90-Day Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
Need help?
Do you have a question about the 58594 and is the answer not in the manual?
Questions and answers