You can also fix the hose by attaching the plastic sleeve to the ventilation grid. In that case, removing
the screws and grid as described in b)–e) is not necessary.
Figure 6
Figure 8
When mounting, make sure that the plastic sleeve is properly attached to the ventilation grid (refer to
fig. 8 to see proper mounting).
Important Note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written permission
of WilTec Wildanger Technik GmbH.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 34223
Figure 7
Figure 9
02
Page 4
2022-1