Download Print this page

Before First Use - Mistral Sprint MJKC310 Quick Start Manual

Advertisement

Your Mistral Sprint
Congratulations on the purchase of your new Mistral
Sprint
1.8L Cordless Kettle.
TM
Before fi rst using your Mistral Cordless Kettle, it
is most important that you read and follow the
instructions in this use and care booklet, even if
you feel your are quite familiar with this type of
appliance.
Your attention is drawn particularly to the section
dealing with IMPORTANT SAFEGUARDS. Find a place
and keep this booklet handy for future reference.
Your Mistral Cordless Kettle is safe and easy to use.
It has been designed to function quietly and safely
under normal circumstances.
This quality Mistral Cordless Kettle is fully portable,
with a sturdy metal body and contemporary design.
The Heater features an easy to set thermostat
control, two heat settings as well as a cooling fan
option.

Before First Use

Fill the Kettle to maximum level and boil the water.
Empty the Kettle out and refi ll.
How to use your Mistral
Sprint Cordless Kettle
Open the hinged lid.
Fill the Kettle to the desired level, ensuring that
the water covers the minimum level indicated
on the water window. DO NOT OVERFILL, as
water may eject from the Kettle. The water level
window will help you gauge the correct amount.
Close the lid.
Kettle must be on a dry and level surface.
Place Kettle onto the power base. The electrical
connections will be made automatically as the
Kettle rests onto the base.
Insert the plug into a power outlet and switch on.
Switch on by pressing the ON/OFF switch down.
The power indicator light will come on.
1.8L Cordless Kettle
TM
When the water has boiled, the Kettle will switch
off automatically. If required, after a short delay,
the water can be brought back to the boil by
resetting the ON/OFF switch to ON.
Switch OFF at the power outlet before removing
the Kettle from the power base. The Kettle can be
switched off at any time by switching the ON/OFF
button to OFF, or by turning OFF at the
power point.
To remove the Kettle from the base unit, grasp
the handle and hold the Kettle horizontally while
lifting it clear of the base unit. Take extra care if
the Kettle is fi lled to the maximum level.
Caution should be taken when opening any
Kettle lid immediately after boiling as hot water
droplets and/or steam may come into contact
with your skin and burn.
Allow Kettle to cool before opening the lid.
4

Advertisement

loading