Table of Contents
Advertisement
Quick Links
Baridi 5L Universal Beer Dispenser Tap
with Integrated Cooling
Model No. DH49
Thank you for purchasing a Baridi product from the Dellonda range. Manufactured to a high standard,
this product will, if used according to these instructions, and properly maintained, give you years of
trouble free performance.
DH49 v1 Issue 1 25/08/20
Advertisement
Table of Contents
Related Manuals for baridi DH49
Summary of Contents for baridi DH49
- Page 1 Integrated Cooling Model No. DH49 Thank you for purchasing a Baridi product from the Dellonda range. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
- Page 2 Important Information Please read these instructions carefully and note any safe operational requirements, warnings & cautions. Use the product correctly and with care for the purpose for which it is intended. Failure to do so may cause damage and/or personal injury and will invalidate the warranty. Keep these instructions safe for future use.
- Page 3 Modern stainless steel and black design. • NOTE: The LED display shows the current • SPECIFICATION temperature of the beer and pressing • Model no: DH49 and holding the ‘+’ key displays the set • Lowest temperature: 4°C temperature. • Allow the unit time to reach the set •...
- Page 4 • CO CARTRIDGE Cartridge housing Fig.2 Pierce tool and ‘O’ ring Fig.3 • DO NOT attempt to remove a cartridge if it is not empty. • BEER DISPENSING UNIT • NOTE: Ensure that the pressure control • Assemble the dispensing unit by locating the valve is set to fully closed before attempting peg on the main body into the notch in the removal or replacement of a gas cylinder.
- Page 5 • NOTE: Ensure a firm leak proof location within the tap body. Relocate centre section back to original position. Connection direct Pierce keg seal To dispensing unit And push down Centre Fig.6 section Release Button Clip unit under keg rim Fig.5 •...
- Page 6 to 20 hours depending on initial beer temp Heineken adaptor fitted and ambient temp. • The unit has a temperature setting range of between 4 C and 12 • To set a required beer temperature use the ‘+’ or ‘-’ key to set the value. •...
- Page 7 No liability is accepted for incorrect use of this product. Guarantee is 12 months from purchase date, proof of which is required for any claim. Dellonda Limited, Sole UK Distributor of Baridi Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757575 support@dellonda.co.uk...
Need help?
Do you have a question about the DH49 and is the answer not in the manual?
Questions and answers
How do you buy the o rings