Westmed VixOne Assembly Manual

0217
UNITS - 1
Rx Only

SUGGESTED PROCEDURE:

1. These products are intended for use in delivering aerosol medications.
2. All products are to be used in accordance with the applicable prescription.
3. Remove the Nebulizer from the package and add the prescribed medication.
4. Assemble the Nebulizer Top to the Bowl per the Instructtion Sheet.
5. Attach the Nebulizer to the components included in this kit and then connect the supply tube to the gas
source 50 psi (413 kPa) max, compressed air and/or oxygen. Rotate the Threaded Nut (if included) 1/4
turn to ensure proper fit.
6. Ensure that all connections are secure, and then start the gas flow 4-10 LPM.
7. Confirm appropriate aerosol function.
Do not use oxygen near ignition source
not tested for anesthetic systems
5
4.5
4
3.5
3
2.5
2
1.5
1
0.5
0
6
LPM
Performance information may not apply to drugs supplied in
suspension or high viscosity form, consult drug supplier.
Westmed
5580 S. Nogales Highway
Tucson, Arizona 85706 USA
Phone: 800-975-7987
Fax: 520-294-6061
www.westmedinc.com
ASSEMBLED IN MEXICO
LABEL PN 77731, Rev. 01
7 8
VixOne Small Volume Nebulizer
TM
Nebulizador para Pequeños Volúmenes VixOne
Nebulizador de Pequeno Volume VixOne
Nebuliseur à faible Volume VixOne
Nebulizzatore per Volumi ridotti VixOne
VixOne Vernebler für Kliene Volumina
TM
0.45
0.4
0.35
0.3
0.25
0.2
0.15
0.1
0.05
0
4 5 6
TM
TM
7 8 9 10
LPM
MT Promedt Consulting GmbH
Altenhofstr. 80
66386 St. Inbert, Germany
TM
TM