Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for JBS NAE-9C
- Page 1 INSTRUCTION MANUAL Nano Control Unit...
-
Page 2: Packing List
This manual corresponds to the following references: - NAE-9C (100V) - NAE-1C (120V) - NAE-2C (230V) Packing List The following items are included: Nano Control Unit ........1 unit Cable Collector and Stand ....2 units Ref. CC2002 Brass Wool ..........1 unit Metal Brush .......... -
Page 3: Features And Connections
para manuales - color gris 200 mm Features and Connections 130 mm 130 mm Cable collector Accessorie: Tool extension cord (1m)* 100 mm Ref. A1205 Stand: Intelligent Heat 80 mm Management 60 mm Nano Handle* Process Ref. NT115-A Screen: 2.8 Color TFT 50 mm Cartridge Extractor 40 mm... - Page 4 Tool Stand Assembly Tool Stand Replacement Loosen the screw (1) and withdraw the tool Insert the new tool stand (3) and tighten the stand (2). screw (4).
- Page 5 para manuales - color gris 200 mm DDE Work Screen Work Screen 130 mm 130 mm The DDE offers an intuitive user interface which provides quick access to station parameters. NAS offers an intuitive user interface which provides quick access to station parameters. Default PIN: 0105 Default PIN: 0105 100 mm...
-
Page 6: Advanced Functionalities
Advanced Functionalities It provides detailed graphics of tip temperature and power delivery in real time during solder joint formation for analysis purposes. This helps you decide how to adjust your process or which tip to use to obtain the best quality soldering. Graphics Designed to avoid thermal shock when soldering Ceramic Chip components like MLCC, this new and unique feature allows controlling the heating ramp up rate of the... -
Page 7: Operation
para manuales - color gris 200 mm Operation 130 mm 130 mm JBC’s Exclusive Heating System This revolutionary technology is able to recover tip temperature extremely quickly. This allows the user to work at a lower temperature. 100 mm As a result, tip life increases by 5. 1. - Page 8 Chip Components Rework Process using Tweezers* and Pedal* The Adjustable Nano Tweezers is the most effective tool for desoldering chip components but also it facilitates its rapid placement and soldering by using the P-405 pedal connected to the station. Adjustable Nano Tweezers* Ref.
- Page 9 para manuales - color gris 200 mm 130 mm 130 mm 100 mm Pad Cleaning Clean the pads with the desoldering tool DS360*. 80 mm For this operation JBCs desoldering station* is needed. 60 mm 50 mm 40 mm Solder Paste Dispensing Manual Solder Paste Apply the solder paste amount needed to Dispenser*...
- Page 10 19:29 Placing Do not press the pedal. NT105 ºC Use the tweezers to position the component on the previously tinned pad. Note: The inactive tool prevents the component from heating up prematurely. Selected 350ºC Power Soldering Once in position press and hold the pedal to activate the tweezers and perform the soldering.
-
Page 11: Changing Cartridges
para manuales - color gris 200 mm Changing Cartridges 130 mm 130 mm Save time and change cartridges safely without having to switch the station off. 1. Removing 2. Inserting 3. Aligning 100 mm 80 mm 60 mm Place the cartridge into the Push the cartridge into the Use the holes to rotate extractor slot (1) and pull the... -
Page 12: Maintenance
Maintenance Before carrying out maintenance, always switch the device off and disconnect it from the mains. Allow the equipment to cool down. - Clean the station screen with a glass cleaner or a damp cloth. - Use a damp cloth to clean the casing and the tool. - Page 13 para manuales - color gris 200 mm Safety 130 mm 130 mm It is imperative to follow safety guidelines to prevent electric shock, injury, fire or explosion. 100 mm - Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire. - The power cord must be plugged into approved bases.
- Page 14 Notes...
-
Page 15: Specifications
130 mm Specifications Nano Control Unit 100 mm Ref. NAE-9C 100V 50/60Hz. Input fuse: 0.5A. Output: 8.5V Ref. NAE-1C 120V 50/60Hz. Input fuse: 0.5A. Output: 8.5V Ref. NAE-2C 230V 50/60Hz. Input fuse: 0.2A. Output: 8.5V - Output Peak Power: 14W per tool... - Page 16 Warranty JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear or misuse. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.