1 Replacement paper filter element 1 Cleaning fluid ecco-clean Packing List easy cleaner 2: 1 easy cleaner 2 1 Drying cup 1 Connecting cable black to easy cleaner 1 1 yellow hose as connection to easy cleaner 1 Page 2 of 14 Update 04/2022...
Current consumption max. 1A Power consumption max. 12W Type of protection IP 22 according to DIN EN 60529 210x210x90mm easy cleaner 1 Dimensions L x W x H Weight approx. 1.8kg 180x180x50mm easy cleaner 2 Dimensions L x W x H Weight ca.
Marketing - Dienstleistung - Schnellhörtester - Hörgeräte-Servicetools Commissioning / easy cleaner 1 & 2 easy cleaner 1 – Fixing of hose brackets and hoses Turn off the 2 knurled screws at the rear right and left side of the housing.
Page 6
Please do not glue it on the top of easy cleaner 1 since easy cleaner 2 will possibly be mounted there. If you have ordered easy...
Page 7
If easy cleaner 1 & 2 are operated simultaneously the black cable and the yellow hose have to be inserted in both devices. The drying cup can be placed on the rubber pad. Thus easy cleaner 1 & 2 are ready for operation.
VA. The ambient temperature must be at –5° up to a maximum of + 40°C , easy cleaner is only allowed for indoor use and installed electrical elements must be protected against direct moisture. Please note that easy cleaner 1 & 2 should be located in a special ventialted room. Contents: easy cleaner 1 red and blue hose incl.
Drying of hearing aids / easy cleaner 2 Easy cleaner 2 must be placed on easy cleaner 1 and be connected by means of cable and hose. Place the hearing aid (max. 2 hearing aids) on the rubber pad and place the cup on top. Before doing so, we recommend removing all hooks and/or filtering systems.
Marketing - Dienstleistung - Schnellhörtester - Hörgeräte-Servicetools Care and Cleaning / easy cleaner 1 & 2 We recommend daily cleaning of the filter of the vacuum pump (but at least once a week). It is installed on the back of the device (easy cleaner 1 Ignoring this instruction may cause a defect of the device.
Marketing - Dienstleistung - Schnellhörtester - Hörgeräte-Servicetools Make sure that the filter is inserted correctly. This can be checked by switching on the device and closing the red vacuum hose with the finger. The LED should then change from green to red. In case the LED...
Marketing - Dienstleistung - Schnellhörtester - Hörgeräte-Servicetools General Information The special features of cleaning are achieved by means of a control technology having been exclusively developed for these functions. No check of the function of the power LED (green) at the front of the device, mains connection and power supply unit.