Advertisement
fig. 5: Power connections.
either the supplied cable or one manufactured by Doepfer.
Looking at the rear of the module, the negative supply (red stripe) is on the
left, positive supply is on the right (see fig.4).
The Header marked "+5V" allows you to select whether the +5V is supplied
by the main +5V power bus or derived internally from the +12V supply. Set the
shunts in the position indicated by the PCB legend.
A big thank you to those who have sent in suggestions and comments, keep
them coming!
Comments, inquiries, samples, suggestions, complaints to:
Drawings and designs ©2022 flight of harmony, LLC.
By the way, the cover art is a an exercise I did in art class decades ago. One of those where you make gestures
with your hand and try to draw them on a pad of paper without looking at the paper, only at your hand. Then you
work on it in charcoal afterward and pretend it's real art. I even had to give it a title: "The Guarding Dark".
But hey, it's got shadows so it works for this. Don't judge me.
SoSv3-K v1.0 manual May. 2022 — p.7/16
Overview (cont.)
+5V Source Selection
flight@flightofharmony.com
http://www.flightofharmony.com
We are tomorrow's shadows...
The power connector header is a
2x8/16-pin shrouded box header which
accepts the standard Doepfer power
cable. This header style is polarized,
meaning the connector can only be
inserted one way, to prevent connecting
the power backwards and damaging the
unit.
This assumes that you are using
Stuff
Power
www.flightofharmony.com
Advertisement
