Advertisement
Receiving an HDTV Signal
There are three basic ways to receive an HDTV signal on your new TV:
1. Over-the-Air (Antenna)
2. Cable or Phone Company HDTV Service
Connect a high quality outside antenna (not
Cable or phone company HDTV service customers
supplied) directly to the antenna input on
will need to subscribe to High-Definition Service
the TV (reception cannot be guaranteed and
from your local provider. (Additional monthly
is based on proximity to the local signal).
subscription cost may apply).
Connecting to a High-Definition Input on your TV
You can connect directly from an antenna, or if you are using an HD cable box or HD satellite box, there are three standard connections that can be used to receive an HD signal.
1. Antenna Input
2. HDMI
®
to HDMI
®
®
To connect directly from
HDMI
is the best connection
an antenna or basic cable:
for HDTV. This is a digital
connect the cable directly
connection that carries both
to the antenna input on the
digital video and digital audio.
back of the TV.
INPUT
OUTPUT
INPUT
TV
Cable box/Satellite box
Initial Setup
You must select a Language, either Home/Store mode, before you can exit out of the Setup Menu. The EXIT button will not function until these selections have
been made.
1. Menu Language
2. Time Zone
Select a language.
Select a time zone
Press ENTER.
Initial Setup
Initial Setup
Menu Language
English
Menu Language
English
Time Zone
Eastern
Time Zone
Eastern
5. Start Scan
If you want to stop scanning,
Select Start Scan.
press EXIT while scanning.
Press ENTER.
Channel Program
Press EXIT for no change.
Start Scan
Navigating the menu system
You can use the buttons on the remote control
Picture
Picture
to access and navigate your TV's onscreen
Picture Mode
Standard
menu system.
Sound
Reset
• Press MENU to open the menu system.
Backlight
55
Contrast
95
Options
Brightness
0
Installation
Color
0
Tint
0
Sharpness
0
Timers
Advanced Picture Setting
Display Setting
Get Help
(Sample Image)
3. Satellite
Satellite customers will need a High-Definition
satellite receiver and appropriate dish hardware.
(Additional monthly subscription cost may apply).
3. DVI to HDMI
®
Your HD Cable Box or HD Satellite Receiver
may have a DVI connection. This will be
connected to the HDMI
®
jack on the TV using an
®
®
HDMI
cable and an HDMI
to DVI converter.
DVI carries digital video only.
TV
OUTPUT
INPUT
Cable box/Satellite box
TV
3. Store / Home Mode
Select Store / Home Mode.
Press ENTER.
Store / Home Mode
To use this TV for display in a store showroom, please select [ Store ].
[ Home ] mode is recommended for normal use.
Home
• When a menu is opened, use the arrow buttons (
on the remote control, to move in the corresponding
direction in the menu.
• Press ENTER to save your menu settings or select a
highlighted item. (A highlighted menu item appears in a
different color in the menu.)
• All menus close automatically if you do not make a
selection within 60 seconds.
• To close a menu instantly, press EXIT.
Quick Tour
Back
4. Component Video Input
TM
ColorStream
HD Component may also be used
®
to receive HDTV. Use if no HDMI
or DVI jack
is available. There are three jacks color-coded
with red-green-blue on the back of the TV and
HD cable box or HD Satellite receiver. This
connection will require a separate analog audio
connection (use the red and white audio
connections).
Left side
OUTPUT
INPUT
Cable box/Satellite box
TV
4. ANT/CABLE in
Select Antenna or Cable.
Press ENTER.
ANT / CABLE in
Antenna
Need Help?
Consult the electronic User's Guide
L1400U series and L1400UM series: To access the electronic
User's Guide please visit support.toshiba.com
Type in your product model or serial number, press GO, and then
)
click Manuals & Specs.
L1400UC series: To access the electronic User's Guide please
visit www.toshiba.ca/support/ceg
For solutions to the most common problems, refer to the
Troubleshooting section of the User's Guide.
Visit Toshiba's Support Web site
L1400U series: support.toshiba.com
L1400UC series: www.toshiba.ca/support/ceg
L1400UM series: http://www.toshiba.com.mx/
tdmConsumo/Informacion/Contacto.aspx?ID=SPT"
Front
Power button
Channel / Volume increase/decrease
Switches the function of the
VOL +/- buttons to select the
volume, channel, or input mode.
USB port
For more information about the CH/INPUT button,
refer to the User's Guide.
Most problems are easy to correct. Save time with one of these simple
solutions.
Call Toshiba Customer Support Center
If you are experiencing a technical problem or have questions
operation, authorized service centers, warranty or parts,
Toshiba Customer Support Center is ready to help.
L1400U series: (800) 631-3811 From inside the United States
(949) 583-3050 From outside the United States
L1400UC series: 1-800-268-3404 From within Canada
L1400UM series: 9126-5165 and 9126-5166 For Mexico
01-800-712-67-64 lada 800 For Mexico
ColorStream is a trademark of Toshiba America Information Systems, Inc.
The terms HDMI and HDMI High-Defi nition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
All other brand and product names are trademarks or registered trademarks of their
respective companies.
Printed on recycled paper
©2013 Toshiba America Information Systems, Inc. • GMA501281010 • 11/13
Remote sensor
Power On/Standby LED
Advertisement
