NENKO 24105008 Quick Start Manual

1. Name of the product

Illuminated ball pool 200 x 150 cm

2. Product code

24105008

3. Colour

Determine colour

4. Short description

An illuminated ball pool that is suitable for our audience. Find total relaxation in this
illuminated ball pool. The ball pool is easy to install.
*PLEASE NOTE: The balls for the ball pool are not included.

5. In use

1. Carefully unpack the 2 packs and separate all blocks as shown below
2. Place blocks 1 & 2 (with light bars) in front of each other and place blocks 3 & 4 on both sides
as shown below.
3. Connect the 2 cables of block 4 to those of block 1 and similarly connect the 2 cables of block
4 to those of block 2.
4. Once the cables are connected, keep the cables in blocks 1 and 2 and continue connecting
the 4 blocks using the Velcro system. You also connect the blocks to the base.
5. The last step is to connect the power cord of block 2 to the switch box and connect the box
to the mains (220v to 100 volts).
6. Turn the ball pool "on" and enjoy!

6. Sensory Stimulations

See, Feel, Proprioception

7. Specifications

1. With bisonyl lining in the colour of your choice; the 1st colour is the long side and the 2nd
colour is the short side.
2. This ball pit is made of foam blocks connected with a velcro system.
3. Two blocks have a frame on the inside with a light bar that illuminates the entire ball pit.
4. This light changes colour by making movements and sounds, for example clapping.
5. To improve the effect, it is recommended to fill the ball pool with transparent balls (balls not
Included).
6. Once the ball bath is connected you can choose 2 modes: