Before First Use; Intended Use; Assembly; Function - Batavia BT-CLM001 Operating Instructions Manual

• When cleaning, not in use or during
maintenance, switch off the lawn
mower and pull the safety key.
• Allow the lawn mower to cool down
before storing in closed rooms.
• Clean the lawn mower after each use.
• Should the lawn mower become
damaged, do not use the lawn mower
furthermore and have it repaired by a
professional or contact our customer
support department. Do not
disassemble the lawn mower or try
repairing it yourself.
• Only use accessory recommended by
Batavia. Contact our support
department.
• The grass catcher and some
components are subject to wear and
deterioration, which could expose
moving parts or allow objects to be
thrown. Frequently check these
components and replace them, when
necessary. Only use original
replacement parts.

3. Before first use

Remove the machine and the accessories
from the packaging. Check the machine for
transport damage and do not use the
machine in case of damages. Keep the
packing materials away from children, risk
of suffocation!

4. Intended use

The Cylinder Mower has been designed for
cutting lawn and grass areas of private
houses. Compliance with these instructions
provided by us is a prerequisite for using the
cylinder lawnmower correctly.

5. Assembly

Assembling the handle
5.1
(See Fig. B, C).
a. Insert the lower part of bottom upright
to the upright holder to stop.
b. Insert the screws left through lower
parts of central upright, upper part of
bottom upright to stop.
c. Screw clamping lever onto screws
several turns.
d. Insert the screws right through lower
parts of central upright, upper part of
bottom upright to stop.
e. Screw clamping lever onto thread rod
several turns.
f. Push the screws through the upper
handle and the middle handle section
and secure with the clamping lever.
Note: The safety lock (2) of the handles
must be on the right in the direction of
travel.
g. Fix the motor cable (not in pic.) to the
handle with the three cable clips.

6. Function

Mowing correctly
6.1
To produce a well-maintained lawn we
recommend cutting the lawn once a week if
possible. The lawn becomes thicker if cut
frequently.
Relatively long cut grass (> 1 cm) must be
removed so that the lawn does not become
yellow and matted.
After relatively long intervals between
mowing (holiday lawn), up to max.12 cm,
first of all cut in one direction with the
cutting height as high as possible, then cut
in the crosswise direction at the cutting
height required.
Wherever possible, only mow dry lawns.
Damp lawns may lead to uneven cutting.
The area of lawn you can mow with one
charged battery depends on the height and
thickness of the lawn, i.e. the taller and
thicker the lawn, the smaller the area of
lawn you can mow with one fully charged
battery.
With very dense grass, we recommend
scarifying the lawn. For example, with the
Lawn Aerator.

7. Operation

RISK OF INJURY
Risk of injury if the cylinder mower does not
switch off automatically!
Do not remove or bypass safety devices on
the cylinder mower (e.g. by tying the
starting handle to the upper part of the
upright)!
English
7