Page 2
Please read the manual before use. ◆ The information in this document won't be modified or extended in accordance with any notice. ◆ The watch should be charging 2 hours at least before use. 1. Caution: 1.1 Waterproof and dustproof The watch supports waterproof and dustproof.
Page 3
· Do not use blowers and other heated equipment to dry the watch. · In sauna room, the waterproof function may be damaged. 1.2 Cleaning and management of PRIME GTR Follow the below points to ensure that PRIME GTR is operating normally and looks good.
Page 4
· After exercising or sweating, please clean your wrist and strap. Use water to clean PRIME GTR and dip a small amount of alcohol to wipe, then dry it thoroughly. · If PRIME GTR is stained or infiltrated with other objects, please use wet soft toothbrush to clean it.
2. Product specification ◆ Model: PRIME GTR ◆ CPU RTL8762C ARM Cortex-M0 53MHz ◆ Memory:RAM 128KB+ ROM 128Mb ◆ Capacitive touch screen 1.3” 360*360 pixel IPS ◆ Bluetooth version 5.0 ◆ Function:Temperature, Heart Rate, Push Dial, Do not disturb, Daily activity, Sleep, Notification (G-mail, Facebook, Skype, WhatsApp and so on) ◆...
Page 6
to the menu screen, then tap the function icon to enter the corresponding sub-menu. (3) Wake up screen: When the watch screen is in the off state , you can press the power key to wake up the screen. If the Gesture control button is turned on in the APP, you can also wake up the screen by turning the wrist.
Power on. When the watch in clock mode, please long press on the middle screen and set different clock interfaces if you like. 5.Product quick use 5.1 Download and install You have to download and install the " CARNEO FIT " App from APP...
Launch the installed CARNEO FIT application. After launching, you will get to the welcome page, where all available products are automatically searched. CARNEO in your area. If no Android phone is used to find the product, GPS / location services must be turned on. This is required by some versions of Android.
5.3.1 Daily activity (1) Function introduction: The watch will display the user's total number of steps on the day, walking distance, calories burned on the same day, and the data will be cleared at 0 o'clock (midnight) every day. (2) Operation instructions: The main interface swipes left and right and clicks the motion data to switch to the step counter interface.
Page 10
measurement is completed, the value will be displayed. Remark: During testing body temperature, environment temperature requires within 18-30°C. 5.3.3 Sports In sports mode: the single-point function icon allows you to enter sports modes such as Walking, Running, Climbing, Riding, Basketball, Elliptical and Yoga.
Page 11
displayed. If the result cannot be detected, it will always be displayed. The display value is zero until standby. 5.3.5 Sleep (1) Function introduction: The watch will display the user's sleep time the night before. (Sleep measurement time 21:30 - 12:00 next day) (2) Operation instructions: Swipe the main interface left and right, click sleep to switch to the sleep interface, you can view the sleep time of the previous day.
5.3.7 Weather After connected with HitFit Pro, the watch will show local weather. 5.3.8 Timer Click to start timing. During the timing, you can start/pause/reset switching with a single touch. 5.3.9 Countdown You can choose 1min, 5min, 10min, or set any time you want to use countdown function.
Page 13
When you connect your phone, the phone vibrates and rings when you click the Find Phone icon. 5.3.12 Relax Adjust your breathing and relax. 5.3.13 Setting ⚫ Bright screen display: Including Dial switch, Brightness, Screen time, Turn wrist wake setting. ⚫...
Page 14
Typographical errors reserved TRUST system s.r.o. www.carneo.eu...
Need help?
Do you have a question about the PRIME GTR and is the answer not in the manual?
Questions and answers