Advertisement
Quick Links
Operation Manual
Air Impact Wrench and Accessories
61871
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Summary of Contents for XPOtool 61871
- Page 1 Operation Manual Air Impact Wrench and Accessories 61871 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
- Page 2 To allow for a smooth execution of your complaint or return, it is important to contact our customer service team before returning the goods. Returns Department WilTec Wildanger Technik GmbH Königsbenden 28 52249 Eschweiler E-mail: service@wiltec.info Tel: +49 2403 55592–0 Fax: +49 2403 55592–15 https://www.XPOtool.com Item 61871 Page 2 The Tool Experts 05 2022-1...
- Page 3 Tool use and care • Get to know this tool. Read the manual carefully, learn its application and limitations, as well as the specific potential hazards related to this tool. https://www.XPOtool.com Item 61871 Page 3 The Tool Experts 05 2022-1...
- Page 4 Other accessories which are not designed for the generated forces may break and force- fully launch pieces. • Attach all accessories properly to the tool before connecting the air supply. A loose accessory may detach or break during operation. https://www.XPOtool.com Item 61871 Page 4 The Tool Experts 05 2022-1...
- Page 5 1 × air pressure hose (5 m × 5 mm × 8 mm) • 1 × collet chuck • 5 × mounted 6 mm (¼″) point • 5 × mounted 3 mm (⅛″) point https://www.XPOtool.com Item 61871 Page 5 The Tool Experts 05 2022-1...
- Page 6 All compressed air contains moisture and other contaminants that can harm the internal components of the tool. An air filter will remove most of these and significantly extend the life of the tool. Ensure https://www.XPOtool.com Item 61871 Page 6 The Tool Experts...
- Page 7 • Push and snap the required ½″ drive impact socket (not included) onto the anvil. CAUTION: • Always keep the tool pointed in a safe direction. https://www.XPOtool.com Item 61871 Page 7 The Tool Experts 05 2022-1...
-
Page 8: Troubleshooting
Severe air leak- Cross-threaded hous- Check for incorrect alignment and uneven gaps. If cross- age (slight air ing components threaded, disassemble and replace damaged parts before leakage using the tool. https://www.XPOtool.com Item 61871 Page 8 The Tool Experts 05 2022-1... - Page 9 Rear gasket Air regulator Anvil (½″ sq) Rear cover Valve stem Hammer pin Washer Steel ball Hammer dog Screw Spring Hammer cage Rubber Hose adapter Drive cam Screw Valve sleeve https://www.XPOtool.com Item 61871 Page 9 The Tool Experts 05 2022-1...
- Page 10 Do not open or disassemble the power tool. Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH. https://www.XPOtool.com Item 61871 Page 10 The Tool Experts 05 2022-1...