Download Print this page

Master Garden Bamboo North Arbor BNA-72 Assembly Manual

Master Garden Products.

1-800-574-7248

Bamboo North Arbor (BNA-72) Assembly Guide

Included Hardware:

3" long hex screws (4)

1.5" long hex screws (8)

Hex tool (1)

Bamboo leg support pieces (total 4, 2 of each connecting pieces):

Bamboo roof pieces (2):

Bamboo corner bracers (4):

Table of Contents

Do you have a question about the Bamboo North Arbor BNA-72 and is the answer not in the manual?

Page 1 Master Garden Products. 1-800-574-7248 Bamboo North Arbor (BNA-72) Assembly Guide Included Hardware: 3” long hex screws (4) 1.5” long hex screws (8) Hex tool (1) Bamboo leg support pieces (total 4, 2 of each connecting pieces): Bamboo roof pieces (2):...
Page 2 1. Setup up the leg supports first. It doesn’t matter which pair is matched but the end that needs to slide into the hollowed section must be the larger diameter end. It should fit snug if inserted correctly. Do this for the other pair. 2.
Page 3 3. Slide the leg support piece onto one end of the just completed roof piece. The correct end should be labeled with a numbered sticker. Make sure it’s locked in and slid all the way through. Insert a bracer at the corner and use two 1.5” hex screws to secure it. Do this for the remaining 3 corners.