Related Manuals for Genie Union Community UBio-X Slim
Summary of Contents for Genie Union Community UBio-X Slim
- Page 1 UBio-X Slim User Guide Version Eng-1.3 Distributed by Copyright 2000 By Union Community Co., LTD.
-
Page 2: Revison History
UBio-X Slim User Guide <Revison History> Version Date Description Firmware Version 2019-03-15 Initial Release 2019-03-25 Modified some words. Modified the menu titles according to terminal’s 2019-04-25 menu modes. Added the explanation of USB user and log 2019-05-17 download. Modified the explanation of USB and added the 2019-06-05 feature of motor lock. -
Page 3: Glossary
UBio-X Slim User Guide <Glossary> Admin, Administrator A user who can enter into the terminal menu mode, he/she can register/modify/delete terminal users and change the operating environment by changing settings. If there is no administrator for a terminal, anyone can change the settings. In this regard, it is recommended to register at least one administrator. -
Page 4: Table Of Contents
UBio-X Slim User Guide Contents <Revison History> ....................2 <Glossary> ........................ 3 1. Before use ......................5 1.1. Safety Precautions ....................6 1.2. Specific names of the terminal ................6 1.3. LCD Display Composition ..................7 1.3.1 Status Icons......................8 1.4. - Page 5 UBio-X Slim User Guide 3.9. Initialize......................... 35 4. How to use terminal ................... 36 4.1. How to open the door ..................36 4.2. How to punch for TnA ..................38...
-
Page 6: Before Use
UBio-X Slim User Guide 1. Before use 1.1. Safety Precautions Warning Handling with wet hands or allowing liquid to flow into it Do not place a fire source is prohibited. near the terminal. -> It may cause an -> It may cause a fire. electric shock or damage. -
Page 7: Specific Names Of The Terminal
UBio-X Slim User Guide 1.2. Specific names of the terminal Camera Flash Daylighting sensor Camera Touch LCD Card Sensing Area Fingerprint sensor... -
Page 8: Lcd Display Composition
UBio-X Slim User Guide 1.3. LCD Display Composition Status Icons Time & Date ID Input Button Menu Button 1.3.1 Status Icons : Standalone Mode (Non-networking Mode) Network Status : Connected to the server (On line) : Disconnected to the server (Off line) None : Normal Status Fire Alarm... -
Page 9: Voice And Beep Sounds In Operation
UBio-X Slim User Guide 1.4. Voice and Beep sounds in operation Operation type Voice sound Success to authorize You are authorized Fail to authorize Please try again Waiting for FP input Please place your finger. Waiting for card input Please place your card. When entering ID Please insert your ID. -
Page 10: Product Introduction
UBio-X Slim User Guide Be aware of certain fingerprint conditions Depending on the user’s fingerprint condition, some fingerprints may not be used or may cause an inconvenience. If the fingerprint is damaged or very unclear, then it cannot be recognized. Please use the RF Card instead in this case. -
Page 11: Product Components
UBio-X Slim User Guide Camera Flash can be activated automatically by the Daylighting sensor. RF Card (125 kHz) Smart Card (13.56MHz) This is Access Control System can be cooperated with Server Database by TCP/IP or Wi-Fi (optional). ... -
Page 12: Connected With Server (Access, Attendance)
UBio-X Slim User Guide 2.2.2. Connected with Server (Access, Attendance) TCP/IP TCP/IP Fingerprint authorization TCP/IP server Internet / WAN / LAN Remote management program TCP/IP (user and terminal setting management) Attendance TCP/IP management program TCP/IP... -
Page 13: Product Specification
UBio-X Slim User Guide 2.3. Product specification Types SPEC Remarks 1.4GHz Quad Core CPU 4.95 inches Touch LCD(480*854) eMMc 8G Bytes Flash Memory 2GByte RAM External USB support Backup data / Upgrade firmware Camera Still Capture Image Color (1600x1200) Camera Flash Sensor Daylighting Flash Control 100,000 Users / In case of more... -
Page 14: Environment Setting
UBio-X Slim User Guide 3. Environment setting 3.1. Checks before setting the environment 3.1.1. Entering the menu by Administrator Terminal users include general users and administrators. General users are only allowed to open the door while the administrator can use the Administrator menu to control the door as well as the terminal’s functions. -
Page 15: Menu Composition
UBio-X Slim User Guide 3.2. Menu composition The Administrator menu has seven submenus as shown below. The following describes each sub menu: 1. User 1. Register 2. Modify 3. Delete 4. List 5. Card Only 2. Auth 1. Normal ▶1:1 Auth Level (Default : 5) ▶1:N Auth Level (Default : 8) ▶Auth Type (Default : Use Identify (1:N Auth)) ▶Auth Order... - Page 16 UBio-X Slim User Guide 3. System 1. Sensor ▶Capture Timeout (Default : 5 seconds) ▶LFD Accuracy (Default : Not Use) ▶Camera Usage (Default : Not Use) ▶Camera Flash (Default: 1) 2. Card ▶Card Type (Default : Not Use) ▶Wiegand Type (Default : Not Use) ▶Send Data (Default : Card Number) ▶Site Code 3.
-
Page 17: User
UBio-X Slim User Guide 2. Display ▶Language (Default : English) ▶LCD Brightness (Default : 3) ▶Main Display (Default : Analog Clock) ▶Waiting Time (Default : 3 Min) ▶Screen Saver ▶Date (Default : System Date) ▶Time (Default : System Time) ▶User Picture (Default : No) 6. -
Page 18: Register
UBio-X Slim User Guide 3.3.1. Register The maximum number of users to enroll to the terminal are 200,000 templates for FP users but Card users or PW user can be enrolled up to 500,000 users. For example, when 10,000 users have 200,000 FP templates totally stored on the terminal, 490,000 users can register with the Card or PW additionally. -
Page 19: Modify
UBio-X Slim User Guide 3.3.2. Modify When modifying the registered user from the terminal, ‘Group’, ‘Permission’, ‘FP’, ‘Card’, ‘PW’, ‘Auth combination’ can be modified freely except ‘User ID’ because it is an unique identifying number so that it couldn’t be modified after registration. And also it is possible on Standalone mode which the network type is ‘Not Use’. -
Page 20: Delete
UBio-X Slim User Guide 3.3.3. Delete The user ID to delete and select [Yes] button. Select [Close] button to delete and go back. If inserting the invalid user ID or unregistered user ID, the error message is displayed. If inserting the valid ID or registered ID, the message is displayed as below. -
Page 21: List
UBio-X Slim User Guide 3.3.4. List To query the registered user list from the terminal, select [Menu] [User] [List] in order. 3.3.5. Card Only The model “UBio-X Slim” realizes more convenient to control the door by Card only without using fingerprint or password. -
Page 22: Auth
UBio-X Slim User Guide 3.4. Auth Select [Menu] [Auth] in order from the terminal, the below picture will be shown. This menu is to set the auth-related option, TNA mode and whether to use the card. 3.4.1. Normal Verify Level / Identify Level Security Level for FP is adjustable per each Auth Type. -
Page 23: Tna
UBio-X Slim User Guide not searched, authentication will be started by Terminal automatically. - Server Only : Authentication should be done by Server only. - Terminal Server : Authentication starts by Terminal and if it is searched, authentication will started Server automatically.. -
Page 24: Timezone
UBio-X Slim User Guide 3.4.3. Timezone If using the feature terminal’s timezone, it is possible to grant to access or deny to access per each period or per each time. But this feature can be used to set the door access on Network mode only. -
Page 25: System
UBio-X Slim User Guide 3.5. System Select [Menu] [System] in order from the terminal, the below picture will be shown. This menu is to configure Sensor, Card, Door, Option for Door and check the terminal’s information. 3.5.1. Sensor This menu is used to set the Sensor Mode, Capture Timeout, LFD Accuracy, Camera Usage and Camera Flash. -
Page 26: Card
UBio-X Slim User Guide * If the authentication type is successful but the authentication type is complex, the image displayed in the result window is the image that matches the last authentication type. Camera Flash When taking pictures with the camera, if the surroundings are dark, the camera flash turns on and you can adjust the brightness of the camera flash to the camera flash value. -
Page 27: Door
UBio-X Slim User Guide 3.5.3. Door There are two functions on this menu. One is able to control two doors and the other is able to support the fire alarm or lighting lamp after connecting to each external device. Door Selection You can select ‘Door1’... -
Page 28: Rs485
UBio-X Slim User Guide 3.5.4 RS485 This menu is used to set the external device is communicated to “UBio-X Slim” via RS485. RS485 Type It is selectable between ‘Not Use’ and ‘BLC010’. RS485 ID When using RS485 communication with the external controller, you can set the RS485 ID 0 to 7. -
Page 29: Information
UBio-X Slim User Guide 3.5.6 Information You can set the terminal ID, the network mode, the number of users and overall terminal information. In this menu, you can check the information but you cannot change the setting. The version information is shown as ‘FW-Kernel version-Root file system version’. -
Page 30: Normal
UBio-X Slim User Guide 3.6.1. Normal There are two modes ‘Network mode’ and ‘Standalone mode’ on “UBio-X Slim” model. And the ‘Network mode’ is divided by ‘Wireline’ and ‘Wireless’. Type It is selectable among ‘Not Use’, ‘Ethernet’, and ‘WIFI’. If selecting ‘Not Use’, terminal is worked as a Standalone mode which is operated independently without connecting network. -
Page 31: Tcp/Ip
UBio-X Slim User Guide 3.6.2. TCP/IP The options on [TCP/IP] should be configured properly to connect to the server after selecting ‘Network mode’. DHCP It is decided when selecting ‘Use’ between ‘Use’ and ‘Not Use’. When using ‘DHCP’, the terminal IP address cannot be changed. Because it obtains automatically. -
Page 32: Sound
UBio-X Slim User Guide 3.7.1. Sound This menu is used to set the sound type about both voice & effect and control its volume. Sound Type If you want the sound as a mute, you can select ‘Not Use’. Also, you can select ‘All’, ‘Voice Only’ and ‘Effect Only’ as you want. Volume You can select the volume from 0 to 5. -
Page 33: Display
UBio-X Slim User Guide 3.7.2. Display Language You can select the language as you want. Below is the supported language. ‘English’, Korean’, French’, Spanish’, Portuguess’, Indonesian’, ‘Persian’, Japanese,’ Russian’, Arabic’ LCD Brightness This is adjustable from 1 to 5 and default is 3.’ Main Display It is selectable among ‘Analog Clock’, ‘Digital Clock’, and ‘Logo Image’. -
Page 34: User Download
UBio-X Slim User Guide 3.8.1. User Download If the USB memory does not exist or there is a file named Slim_UserDB.ndb when you select [User Download], an error window is displayed. Otherwise, a pop-up window will appear asking whether to proceed to download the user. -
Page 35: F/W Update
UBio-X Slim User Guide 3.8.4. F/W Update When you select the FW file to update in the list, the update proceeds as below. After completing this process, the terminal reboots. If you want to download app.ext4, resource.ext4, rootfs- unioncomm_t7.ext4, uImage.unioncomm_t7 files at a time, you can select ‘Total_Firmware_update’... -
Page 36: How To Use Terminal
UBio-X Slim User Guide 4. How to use terminal 4.1. How to open the door There are two below methods to open the door with authentication from the terminal basically. 1:1 Verification This 1:1 Verification can access the door much faster regardless of the number of users on the terminal because it compares only between the inserted fingerprint to the stored fingerprint of the pressed User As shown in the figure below, press the button [ID] to input the registered User ID first and then input the fingerprint or password after pressing the button [enter]. - Page 37 UBio-X Slim User Guide 1:N Identification This method is that the registered fingerprint is placed on the fingerprint sensor in the main screen without inserting User ID. But it can take somewhat long time to authenticate because it compares the inserted fingerprint to all fingerprint data in spite of much more convenient then 1:1 Verification.
-
Page 38: How To Punch For Tna
UBio-X Slim User Guide 4.2. How to punch for TnA In TnA mode, a user must click function key before authentication. And the log is transferred to server with information that function key is selected. If the function key is not pressed on authentication, it is possible not to record the TnA type firmly for user’s ‘Attend’, ‘Leave’, ‘Out’, “In’. - Page 39 UBio-X Slim User Guide Normal TnA mode In this mode, the User ID is pressed after pressing Function key and then try to authenticate. The function keys in Normal TnA mode are defined as below. - F1: Attend - F2: Leave - F3: Out - F4: In If the function key is pressed before authentication, the pressed...
- Page 40 UBio-X Slim User Guide FCC Supplier’s Declaration of Conformity Nitgen / Ubio-X Slim This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.