Table of Contents
Advertisement
Quick Links
Manual for LoRaWAN Lidar People
Counter - WSLRW-LPC | FW 1.0
Thank you very much for choosing Daviteq Wireless Sensors. We are the leading wireless sensor manufacturer in the
World. We have a wide range of wireless sensors which support different connectivity like LoRaWAN, Sigfox, Sub-GHz,
NB-IoT...Please find out more information at
This manual is applied to the following products
Item code
WSLRW-LPC-01
Information Changes in this version v.s previous version
Item
1
Initial version
To use this product, please refer step by step to the below instructions.
Operating Principle
1. Quick Guide
Reading time: 10 minutes
Finish this part so you can understand and put the sensor in operation with the default configuration from the
factory.
1.1 What is the LoRaWAN Lidar People Counter sensor and its
principle of operation?
WSLRW-LPC is a LoRaWAN sensor with a built-in advanced Lidar sensor to detect and count people. It can count the
people walking thru a gate in 2-way with an accuracy higher than 95%. This sensor utilizes lidar technology, which is
not affected by temperature, humidity, and RF noise and is less affected by ambient light...
this
HW Version
1.0
Changes
Changed by
P.N.Diep
Battery
Installation
Configuration
Specification
link.
Firmware Version
1.0
Changed Date
09-05-2022
Remarks
Approved by
Approved Date
N.V.Loc
28-05-2022
Uplink Payload
Connect to Gateway
Troubleshooting
Calibration
Warranty and Support
Advertisement
Table of Contents
Related Manuals for daviteq WSLRW-LPC
Summary of Contents for daviteq WSLRW-LPC
- Page 1 WSLRW-LPC is a LoRaWAN sensor with a built-in advanced Lidar sensor to detect and count people. It can count the people walking thru a gate in 2-way with an accuracy higher than 95%. This sensor utilizes lidar technology, which is...
- Page 2 It is battery-operated and able to connect to any LoRaWAN gateways. It supports all frequency zones. For the principle operation of the Lidar people counter, please refer to this link. 1.1.1 What are the typical applications of this sensor? Please refer to this link for typical applications.
-
Page 3: What's In The Package
1.1.4 What kind of battery is used for this sensor? The sensor is smart, thanks to the integrated PIR sensor. If there were no people around it will fall to the sleep stage to save battery. If there were people nearby, it will wake up in a very short time and then be ready to count people passing thru. -
Page 4: Sensor Installation
Note: Different network server software will have different processes for registering the device. Please refer to the manual of the network server software being used for more details. Please visit this link to get the instructions for adding the LoRaWAN sensors to some common network servers such as Actility, TTN... -
Page 5: Maintenance
1.5.1 Mounting sensor on the ceiling Please take note of the direction of people entering the room of the sensor Then follow this link for instructions on mounting the sensor on the ceiling. 1.5.2 Battery Installation Please follow the instructions in this link. -
Page 6: Sensor Maintenance
3.1 Operating principle of LoRaWAN Lidar People Counter 3.1.1 Operating principle of the complete device The Daviteq LoRaWAN Lidar People Counter comprises 02 parts linked internally as shown below picture. - The Daviteq LoRaWAN module; - The Daviteq Lidar People Counter;... -
Page 7: Sensor Configuration
Case 3: when the device is forced to send data by a Magnet key. 3.1.2 Operating principle of Lidar People Counting Module To understand how Lidar technology can count people, please refer to this link for a complete understanding of this measuring technique. - Page 8 lorawan 01.01.00 string Read LoRaWAN protocol v1.1.0 version application 01.03.00.00 string Read application version server v1.3.0.0 mac layer 04.04.02.00 string Read mac layer version v4.4.2.0 deviceEUI Read Device's number, used to register the product on the Network Server by OTAA Lora appEUI Read Application...
- Page 9 Lora Read key number nwkSkey encrypts communication command of the MAC layer of the End Device, which is used to register the product on the Network Server by Lora Read End Device appSkey data encryption number, used to register the product on the Network Server by...
- Page 10 network ID uint32 Read Network server ID number, used to register the product on the Network server by join mode OTAA string Read OTAA: Over-the-Air activation, ABP: Activation Personalization network PUBLIC string Read PUBLIC, mode PRIVATE region code AS923 string Read 1: AS923, 2: KR920, 3:...
- Page 11 spread SF10 string Read SF12, SF11, factor SF10, SF9, SF8, SF7 activation ADR OFF string Read ADR ON, of ADR ADR OFF class string Read sensor type 1-255 uint16 Read 1-254: sensor type, 255: no sensor battery uint16 Read 4 levels of level battery capacity...
- Page 12 3 / 16 Lora key number nwkSkey (Password) encrypts communication command of the MAC layer of the End Device, which is used to register the product on the Network Server by 3 / 16 Lora End Device appSkey (Password) data encryption number, used to...
- Page 13 3 / 16 adaptative uint16 Automatically data rate (Password) adjust data rate, 0: disable, 1: enable 3 / 16 cycle send uint32 sec (data data sending cycle) 3 / 16 sensor1: uint32 sampling_rate (frequency of data taken from sensor 1) count_threshold uint16 Threshold...
- Page 14 6. References Use-cases: Case studies: White-papers: END. Revision #78 Created Wed, Jun 8, 2022 2:28 AM by Lộc Vĩnh Nguyễn Updated Mon, Jul 4, 2022 2:17 AM by Kiệt Anh Nguyễn...