Advertisement
3
H-8
H-5
K- 4 1
Attach the Back Rails (K-41) to the
outside of the Prop Assembly.
Let the Prop Assembly swing down
so that the Prop Connector can go
below the Back Rails.
4
Please double-check your work at
this time. Any error in this assembly
will cause serious problems later.
Be sure that the Props
are on the inside of the
Back Rails.
Be sure that the Prop
Connector goes below
the Back Rails.
H-6
H-8
Be sure that the Prop
Connector
is below the
Back Rails.
5
Attach the Left and Right
Back Legs (K-6) to the
outside of the Back Rails using
the 3" Cevis Pins (H-12).
Do not put on the Washers
and Hair Pins at this time.
H-12
K-6R
Make sure that the cut-away part of
the Back Legs face in so that they
will support the Back Rails.
6
Place the Seat Rails (K-2)
onto the 3" Clevis Pins and
secure with Washers (H-6)
and Hair Pins (H-5).
K-2
Now put the Washers
and Hair Pins on the
3" Clevis Pins.
H-12
K-6L
Wheels must
face toward
the inside.
K-2
Advertisement
