Philips HR1669 Manual page 2

ENGLISH
Introduction
Congratulations on your purchase and welcome to Philips!
your product at www.philips.com/welcome.
General description
1 Speed selector
2 Turbo button
3 Power-on button
4 Motor unit
5 Release button
6 Bar blender
7 Whisk coupling unit (HR1662/HR1661 only)
8 Whisk (HR1662/HR1661 only)
9 XL chopper coupling unit (HR1662 only)
10 XL chopper blade unit (HR1662 only)
11 XL chopper ice crushing blade unit (HR1662 only)
12 Beaker lid
13 Beaker
14 Compact chopper coupling unit (HR1669/HR1661 only)
15 Compact chopper blade unit (HR1669/HR1661 only)
16 Covers for blade units
17 XL chopper bowl (HR1662 only)
18 Compact chopper bowl (HR1661 only)
19 User manual
Important
Read this user manual carefully before you use the appliance and save it for
future reference.
Danger
-
under the tap. Only use a moist cloth to clean the motor unit.
Warning
- Check if the voltage indicated on the appliance corresponds to the local
mains voltage before you connect the appliance.
-
damaged.
-
order to avoid a hazard.
-
This appliance is not intended for use by persons (including children) with
concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with
the appliance.
- Do not allow children to use the appliance without supervision.
-
appliance is plugged in. The cutting edges are very sharp.
- Never use the chopper blade unit without the chopper bowl.
- Never let the appliance operate unattended.
- Be careful to avoid splashing when you process hot ingredients.
- None of the accessories are suitable for use in the microwave.
-
remove the ingredients that block the blade unit.
-
Caution
- Switch off the appliance and disconnect it from the mains before you
- Never use any accessories or parts from other manufacturers or that
- This appliance is intended for household use only. If the appliance is used
improperly or for professional or semi-professional purposes or if it is
becomes invalid and Philips refuses any liability for damage caused.
-
-
hotter than 80°C/175°F.
-
- Do not process more than one batch without interruption. Let the
appliance cool down for 10 minutes before you continue processing.
- Noise level: Lc = 85 dB [A]
This Philips appliance complies with all standards regarding electromagnetic
Cleaning and maintenance
Never immerse the motor unit, the whisk coupling unit (HR1662/
HR1661), the compact chopper lid (HR1661) or the XL chopper lid
(HR1662) in water or any other liquid, nor rinse them under the tap.
Use a moist cloth to clean these parts.
Before you start cleaning:
Unplug the appliance.
1
Press the release button to remove the accessory attached.
2
Disassemble the accessory.
3
Tip: You can remove the rubber rings from the chopper bowls for extra thorough
cleaning.
Tip: For quick cleaning of the blender bar, empty and rinse the beaker immediately
after use. Then pour warm water with some washing-up liquid in the beaker, insert
the blender bar and let the appliance operate for approx. 10 seconds.
Ordering accessories
www.shop.philips.com/service. If the online shop is not available in
Environment
- Do not throw away the appliance with the normal household waste
recycling. By doing this you help to preserve the environment (Fig. 1).
Guarantee and service
the Philips website at www.philips.com/support or contact the Philips
Question Answer
Why does the The appliance may have been used too long
appliance make a lot
using the appliance and let it cool down for 60
produce smoke or Philips dealer or a service centre authorised by
feel hot? Philips.
Can I process boiling
hot ingredients? 80°C/175°F before you process them.
Which size should
the ingredients have
before I process them?
Is it possible to
damage the appliance process very hard ingredients such as bones
by processing very
hard ingredients? suitable for processing ingredients like Parmesan
cheese or chocolate. With the XL chopper
(HR1662 only) you can also crush ice cubes.
Why does the Some hard ingredients may block the blade unit.
appliance suddenly Release the power-on or turbo button and unplug
stop working? the appliance. Then detach the motor unit and
remove the ingredients that block the blade unit.