Advertisement
F
Hi-end Car Loudspeaker System
6.5 " component system
Design by HiVi Acoustics, Inc.
Thank you for your purchase of HiVi Car-Audio Speaker Systems. Please read the following
installation and operation guidelines carefully to ensure many years enjoyment of car audio speaker
system. All HiVi Speaker Systems products should be set-up and installed by authorized and licensed
technicians.
Though this manual narrates the installation, it didn't show the remove of car.lf you got no experience of
this, please don't set up by yourself,you can inquire at the experienced car service office.
Circuit diagram
Please connect according to the following circuit diagram
Front car loudspeaker system
Rear car loudspeaker system
F1600MKIII
Please note your car is on flameout situation!
CD/DVD
(Amplifier)
lnstallation of Tweeter(KX26T-S)
Option One:if you don't want to change the structure
of car, and install the tweeter before steering wheel
or beside the door of car,then you can use this mode.
1、Take semicircle double sides stick EVA,get rid of
one side protecting paper and stick this on the place
of installation of tweeter(as drawing).
2、 Get rid of another protecting paper of EVA,then
stick speaker at the fixed place.
3、Adjust the orientation of speaker so as to get the
best sound quality.
Note:The merit of this kind of installation is that there
's no need to change the car,the demerit is that can
it fix the tweeter well enough.
Option
Two
: lf you want to fix the tweeter before the
steering wheel or beside the door of car,then you can
use this mode.
1、 Use the"-"screwdriver open the front cover of
tweeter.
2、 Use the screw threading the back cover,
installation plate,then fix the back cover of speaker
on the selected place as drawing.
3、 Put the speaker into the back cover, press the
front cover.
4、 Adjust the orientation of speaker so as to reach
the best sound quality.
Note:This kind of installation needs to lock the
screws on the car,so you have to fix the place of
tweeter before installation.
Installation of Woofer ( F6WIII)
、
1
According the demand then stick the gasket on
the place of Installation.
2、 Drive the screws through the grill and into the
installation holes, and then fasten the screws.
3、If the depth is notenough, can use some mate on
the place of installation then can add some depth.
Because of the design change,the illustration may not conform to the practicality.We will not inform again!
lnstallation of crossover:
1、Pass supplied screws through crossover as illustrated,
install crossover securely inside car door or other desired
position.
F1600MKIII
www.hivi.com
Connection:
1、The drawing of crossover and tweeter,woofer
Adjust high frequency output to +3dB,
-3dB
0dB
0dB or -3dB as per your preference by
+3dB
use of the toggle switch on the crossover.
White
Woofer
White
Red
Crossover
Red
White
Specifications:
Model
F1600MKIII
F6WIII
Woofer
KX26T-S
Tweeter
Sensitivity
8 dB
8
Frequency Response
63-20KHz
100W
Max Power
Power Handling
50W
4Ω
Rating Impedance
φ
157mm
Installation Size
φ
Hole Size
148.5mm
Installation Depth
>66mm
φ172X22mm
Net size
High pass decay rate
12dB/0ctave
Low pass decay rate
6
dB/0ctave
Tweeter
Audio Input(+)
Audio Input(-)
Advertisement
