Page 2
SUPERSAW To reduce the risk of injury to your Check in particular that the controls and eyes never operate your power tool safety devices are working properly. Do not unless wearing goggles continue operating this machine if it is properly fitted protective glasses with damaged.
Page 3
SUPERSAW thereafter at regular intervals (whenever WARNING: To reduce the risk of the saw is shut off). If the saw chain personal injury from fire becomes loose while cutting, switch off the explosion, do not use the chain saw in the motor, disconnect the chain saw from the presence of flammable liquids or gases.
WARNING: Use of this chain saw (including sharpening the saw SUPER BRAND TOOLS recommends that chain) can generate dust, mist and fumes first-time users should cut logs on a containing chemicals that are known to sawhorse —...
Page 5
SUPERSAW issue, consult your employer, governmental asbestos or asbestos-containing products. agencies such as OSHA and NIOSH and If you have any reason to believe that you other sources on hazardous materials. might be cutting asbestos, immediately California and some other authorities, for stop cutting and contact your employer or a instance, have...
Page 6
SUPERSAW WARNING: When sawing, make A DANGER sure that the saw chain does not touch any foreign materials such as rocks, Do not rely on the SuperSaw’s fences, nails and the like. Such objects may insulation against electric shock. To be flung off, damage the saw chain or reduce the risk of electrocution, never cause the chain saw to kickback.
SUPERSAW Product safety the chain saw in a direction opposite to the saw chain movement at the point where the saw chain is slowed or stopped. This may Attn: California residents, pursuant fling the bar up and back in a lightning fast to CA Prop.
This ranges and refrigerators while holding enables better control of the power tool the Super Saw plugged in. There is an in unexpected situations. increased risk of electric shock if your body e) Dress properly. Do not wear loose is grounded.
If you need other spare parts, please b) Use power tools only with specifically use the original product, SUPER BRAND designated battery packs. Use of any TOOLS can provide you with high other battery packs may create a risk of quality parts.
Page 10
SUPERSAW circuit each other or be short-circuited for future reference. by other metal objects. u) Use only the battery pack in the When battery pack is not in use, keep it application for which it was intended. away from other metal objects, like paper v) Remove the battery pack from the clips, coins, keys, nails, screws or other equipment when not in use.
Page 11
SUPERSAW COMPONENT LIST ACCESSORIES Screwdriver 1. GUIDE CHAIN Original charger 2. COMPRESSION NUT Original battery Wrench 3. GLAND NUT Only use the appropriate accessories 4. SIDE COVER intended for this tool. 5. POWER SWITCH State Indicator light charging 6. NON-SLIP HANDLE green charching completed 7.
SUPERSAW OPERATING STEPS Loosen the screw nut counterclockwise and remove the side cover Align the hole, then install the guide plate and chain Install the side cover and tighten the screw gland nut Adjust Chain Tension Twist the Adjusting Screw Clockwise to tighten tension.
Page 13
SUPERSAW WORKING HINTS FOR YOUR CORDLESS Note: The new chain will be stretched in the RECIPROCATING SAW early stage of use. Please check and adjust to the appropriate tension frequently, because If your power tool becomes too hot, run no-load over time the chain can loosen and derail.
Need help?
Do you have a question about the SUPERSAW C100 and is the answer not in the manual?
Questions and answers
Where does the spring go while assembling the supersaw?
how to order a replacement battery for c100
How to order replacement chain. C-100