CONTENTS INFORMATION REGARDING THIS GAS GRILL CLEANING/SERVICING THE GAS GRILL SYMBOLS IN THESE INSTRUCTIONS SAFETY NOTICE UNPACKING THE GAS GRILL STORAGE/TRANSPORT SAFETY NOTICE SAFETY NOTICE REQUIRED TOOLS/AUXILIARY MATERIALS DISPOSAL PARTS DESCRIPTION SCOPE OF DELIVERY TECHNICAL SPECIFICATIONS CONNECTING THE GAS CYLINDER WARRANTY/WARRANTY CERTIFICATE SAFETY NOTICE REQUIRED TOOLS/AUXILIARY MATERIALS...
ENGLISH UNPACKING THE GAS GRILL Mortal danger due to suffocation/swallowing. parts, individual components can have sharp children and dispose of it immediately. edges. Therefore, please wear safety gloves, Furthermore, keep small parts away from children and their range of reach. REQUIRED TOOLS/AUXILIARY MATERIALS PARTS DESCRIPTION Quantity...
Page 5
KANSAS PRO 3 SIK TURBO 870930 (not included) (not included) (not included)
ENGLISH CONNECTING THE GAS CYLINDER SAFETY NOTICE RISK OF FIRE AND EXPLOSION The gas grill can only be operated with a Make sure that there are no sources of ■ ■ pressure regulator. The enclosed pressure ignition, open fire or the like in the vicinity, when connecting or replacing the gas regulator is correctly adjusted for operation cylinder.
KANSAS PRO 3 SIK TURBO 870930 ASSEMBLY PROCESS The “Low pressure clip-on regulator” is a domestic regulator designed to supply gas to consuming appliances at a pressure and capacity as indicated on the identification label ( 37 mbar ). The “clip-on regulator”...
At the same time, only use Dab away excess grease/marinade from ■ original Enders products. Enamelled cast the grill items before placing them on the iron grates and cast iron griddles cannot grill. This does not reduce the flavour of the...
KANSAS PRO 3 SIK TURBO 870930 TURNING ON THE GAS GRILL 4. Press one of the control knobs and turn it counter- Before grilling with the gas grill for the first time, allow clockwise to the highest setting “+”. When doing so, the burners to burn for 15 minutes without any grill you can hear a CLICK.
ENGLISH TURNING ON THE INFRARED GRILL 1. Open the lid and turn all control knobs to the “ “ ATTENTION! position The infrared burner is not infinitely variable. 2. Press and hold the control knob for the infrared burner and turn it counterclockwise to the highest ATTENTION! setting.
Page 11
KANSAS PRO 3 SIK TURBO 870930 HEAT RANGE The Enders HEAT RANGE burner system in the Kansas sensitive types of meat such as tenderloin or roast beef. Pro series provides an ideal distribution of heat on the Thanks to the gentle cooking process, you get juicy-deli- cooking area all the way to the outer zones thanks to a cious grilling results.
Page 12
At the same time, benefit from the special characteristics of cast iron. The even distribution of heat provides for ideal results on your Enders gas grill. SWITCH GRID: Your grill turns into a multifunctional appliance with the SWITCH GRID. The solid, enamelled...
Page 13
KANSAS PRO 3 SIK TURBO 870930 FIRST AID MEASURES MEASURES AFTER SEVERE BURNING OR SCALDING There is an acute risk of hypothermia and ■ shock. Call emergency services immediately! Immediately extinguish possible burning ■ FIREFIGHTING MEASURES clothing with water or put out the flames using a thick blanket.
ENGLISH CLEANING/SERVICING THE GAS GRILL SAFETY NOTICE Despite careful processing of all individual ■ parts, individual components can have sharp Do not make any modifications to the gas ■ edges. Therefore, please wear safety gloves, grill or pressure regulator. The hose must to avoid getting cut.
KANSAS PRO 3 SIK TURBO 870930 STORAGE/TRANSPORT SAFETY NOTICE RISK OF FIRE AND EXPLOSION Store the gas cylinder in an upright position ■ and ensure it cannot topple over. Store the gas cylinder out of the reach of These storage instructions also apply to ■...
ENGLISH TECHNICAL SPECIFICATIONS Model: KANSAS PRO 3 SIK TURBO This appliance was tested and approved according to DIN EN 498:2012 and DIN EN 484:1997 . In its delivery Item no.: 870930 state, the appliance is designed for operation with liquefied gas.
KANSAS PRO 3 SIK TURBO 870930 WARRANTY We grant a 2-year warranty on manufacturers defects relating to the functioning of the product. Prerequisite for this warranty is the proper handling and use of the product and official proof of the date of purchase.
Page 18
KANSAS PRO 3 SIK TURBO 870930 MANUFACTURER Enders Colsman AG Brauck 1 D-58791 Werdohl, Deutschland Tel +49 (0) 2392 - 978230 www.enders-germany.com 200910...
Need help?
Do you have a question about the KANSAS PRO 3 SIK TURBO and is the answer not in the manual?
Questions and answers