Page 3
CONTENTS ENGLISH ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 4 ITALIANO ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 10...
RCF strongly recommends that all speakers should be suspended taking into account all current national, federal, state and local regulations� It is the responsibility of the installer to ensure that all speakers are safely installed in accordance with all such regulations� RCF strongly recommends to inspect the system at least once a year� If any sign of weakness or damage is detected remedial actions should be taken immediately�...
Page 5
VERTICAL HANGING WITH A 10° ANGLE Using the C-BR 10° it is possible to reduce the opening angle from 22�5° to 10°� PACKAGE CONTENT: - 2 X C-BR 10° BRACKETS 1. Unscrew the 8 screws from the Top Plate and remove it� 2.
Page 6
VERTICAL HANGING WITH A 10° ANGLE 3. Place the C-BR 10° as shown in the pictures below� On the top and following speakers of the cluster, the External Plate must be placed next to the C-BR 10°, as shown in FIGURE 1. On the bottom speaker of the cluster the External Plate must be placed as shown in FIGURE 2.
Page 7
VERTICAL HANGING WITH A 10° ANGLE NOTE: The exact same operations must be done on both sides of the speaker 5. Now place the Vertical Fly Bar on top of a Q15 speaker and screw it with the 4 screws provided� The protruding part of the 10°...
EXAMPLES OF CONFIGURATIONS Now with the the vertical flybar FLY BAR FL-B V Q 15 you can hang vertically multiple Q 15 speakers (maximum 6)� EXAMPLE 6 X 10° modules 10° 10° 10°...
Page 9
EXAMPLES OF CONFIGURATIONS EXAMPLE 4 X 10° modules + 2 x 22�5° modules 10° 10° 10° ° 22.5° 22.5°...
Page 10
EXAMPLES OF CONFIGURATIONS EXAMPLE 3 X 10° modules + 3 x 22�5° modules 10° 10° 22.5° 22.5° 22.5°...
Il manuale deve essere considerato parte integrante di questo prodotto e deve accompagnarlo in caso di cambio proprietà come riferimento per la corretta installazione e utilizzo nonché per le precauzioni di sicurezza� RCF S�p�A� non si assume alcuna responsabilità per l’installazione e / o l’uso errati di questo prodotto�...
Page 13
SOSPENSIONE VERTICALE CON ANGOLO DI 10° Mediante l’utilizzo della staffa C-BR 10° è possibile ridurre l’angolo di apertura da 22�5° a 10°� CONTENUTO DELLA CONFEZIONE: - 2 X STAFFE C-BR 10° 1. Svitare le 8 viti dalla Piastra Superiore e rimuoverla� 2.
Page 14
SOSPENSIONE VERTICALE CON ANGOLO DI 10° 3. Posizionare la staffa C-BR 10° come mostrato nelle immagini sotto� Sul primo diffusore in alto e sui seguenti del cluster, la Piastra Esterna deve essere posizionata di fianco alla staffa C-BR 10°, come mostrato nella FIGURA 1.
Page 15
SOSPENSIONE VERTICALE CON ANGOLO DI 10° NOTA: La medesima operazione deve essere fatta su entrambi i lati del diffusore 5. Posizionare il FlyBar verticale sopra al diffusore Q15 e avvitarlo con le 4 viti in dotazione al FlyBar� Le staffe sporgenti dell’accessorio 10° devono essere inserite nella loro sede ricavata sotto alla Piastra Superiore del diffusore sovrastante� Quindi a seconda dell’angolo scelto per l’inclinazione, avvitare le ultime due viti�...
Page 16
ESEMPI DI CONFIGURAZIONI Mediante l’utilizzo del flybar verticale FLY BAR FL-B V Q 15 è possibile sospendere un cluster di diffusori Q 15 (massimo 6)� ESEMPIO 6 moduli a 10° 10° 10° 10°...
Page 17
ESEMPI DI CONFIGURAZIONI ESEMPIO 4 moduli a 10° + 2 moduli a 22�5° 10° 10° 10° ° 22.5° 22.5°...
Page 18
ESEMPI DI CONFIGURAZIONI ESEMPIO 3 moduli a 10° + 3 moduli a 22�5° 10° 10° 22.5° 22.5° 22.5°...
Need help?
Do you have a question about the C-BR 10 Q15 and is the answer not in the manual?
Questions and answers