Related Manuals for Canever ZeroUnoSSD
Summary of Contents for Canever ZeroUnoSSD
- Page 1 ZeroUno Digital to Analog Converter - DAC Preamplifier with an integrated DAC OPERATING INSTRUCTIONS CanEVER AUDIO ®...
- Page 2 CanEVER AUDIO – Operating instructions ® ZeroUno SSD – Digital & Analog Preamplifier FRONT view ON/OFF switch LCD Display SETUP button if pressed for at least 2 sec. or INFRARED RECEIVER - do not cover RESTORE button if pressed for more than 10 sec ...
- Page 3 CanEVER AUDIO – Operating instructions ® ZeroUno SSD – Digital & Analog Preamplifier The left knob is the POWER SWITCH. ZeroUno No power to any part of the ZeroUno is powered on In PLAY mode turning the right knob clockwise or counter clockwise...
-
Page 4: Infrared Remote Controller
CanEVER AUDIO – Operating instructions ® ZeroUno SSD – Digital & Analog Preamplifier INFRARED REMOTE CONTROLLER Button Value Balance Left to Right in steps of 0.5dB each. Range is 0-5dB Volume Up and Down steps of 1.0dB. Range is -60dB to 0dB Phase Absolute Polarity <... - Page 5 CanEVER AUDIO – Operating instructions ® ZeroUno SSD – Digital & Analog Preamplifier ZeroUno To get instant feedback about the status, every time a button is pressed at the RC, the display shows for 5 seconds the value in big digits.
- Page 6 CanEVER AUDIO – Operating instructions ® ZeroUno SSD – Digital & Analog Preamplifier When the MENU key is pressed, the value switches between absolute polarity listening (PHASE+) and inverse absolute polarity listening (PHASE-). As during the recording, the mastering and the production process the absolute polarity of the music program is changing many times, the final digital master file can be stored in inverted polarity.
-
Page 7: Parameters Setup
CanEVER AUDIO – Operating instructions ® ZeroUno SSD – Digital & Analog Preamplifier PARAMETERs SETUP To enter the SETUP mode, press the SETUP button for at least 2 seconds, but less than 10 seconds. Press the SETUP button again to skip from one parameter to the next. - Page 8 CanEVER AUDIO – Operating instructions ® ZeroUno SSD – Digital & Analog Preamplifier RENAME of INPUTS Turn the volume knob to change the NAME of an specific INPUT. 4.sec.to.EXIT&STORE The following names are available: USB, OPTIC, AES/EBU, SPDIF, STREAMER, PC, CD, DVD, SAT, DAT, MD, PHONO,...
- Page 9 Once engaged, it is no possible to stop the RESTORE command. The Specifications in this document are subject to change without notice. CanEVER AUDIO ® Canever Ing. Mario via Como 42/3 30027 San Donà di Piave Venice - Italy +39 335 708 2 807 mail info@canever.eu www.canever.eu...
Need help?
Do you have a question about the ZeroUnoSSD and is the answer not in the manual?
Questions and answers