Download Print this page

Advertisement

Quick Links

Tire-Safeguard
Tire Pressure Monitoring System
TPM-W Models
Operator's Manual
HCI Corporation
www.tiresafeguard.com ● contact@tiresafeguard.com
1. Introduction
Tire-Safeguard
is a wireless tire pressure monitoring system. This
valuable addition to your vehicle will help you drive safer.
Safeguard
automatically monitors your vehicle tires, and will
immediately alert you of abnormal tire pressure and/or temperature,
providing a timely warning to you in order for you to take corrective
action. In addition,
Tire-Safeguard's
maintenance easy. You will no longer need to manually check the tires
with a pressure gauge. Consequently, your tires can easily be kept in
optimal operating condition. The resulting benefits are obvious:
reduced uneven tire wear, reduced severe tire damages, reduced air
loss related tire failures, increased tire life, improved fuel efficiency,
improved vehicle braking and handling. Best of all,
help you drive with enhanced vehicle safety and with less worry of flat
tires and blowouts.
2. Tire Pressure Monitoring System (TPMS) Overview
The major components of
Tire-Safeguard
transmitter per tire, a receiver, and a display. For the rim-mounted
model, the sensor-transmitter is affixed inside the tire on the wheel with
a stainless-steel band. The sensor-transmitter automatically and
continuously monitors the tire and, periodically, transmits out RF
signals with the current tire pressure and temperature readings. Upon
detection of abnormal tire pressure and/or temperature, the sensor-
transmitter will immediately issue a warning signal. The receiver
captures the signals from the sensor-transmitters and forwards them to
the display unit.
Mar. 2006
Tire-
digital display makes tire pressure
Tire-Safeguard
TPMS are: one sensor-
1
TPM-W Operator's Manual
will

Advertisement

loading
Need help?

Need help?

Do you have a question about the TPM-W and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for HCI TPM-W

  • Page 1 The receiver captures the signals from the sensor-transmitters and forwards them to Operator’s Manual the display unit. HCI Corporation www.tiresafeguard.com ● contact@tiresafeguard.com Mar. 2006 TPM-W Operator’s Manual...
  • Page 2 The warnings are listed below in the order of precedence for display selection (from multiple abnormalities) by the system. Mar. 2006 TPM-W Operator’s Manual Mar. 2006 TPM-W Operator’s Manual...
  • Page 3 Setup Button exits the Warning Setup Mode and saves the new settings for all screens. • Turning vehicle’s power off before exiting the last screen always No Sensor Signal cancels the setup. (Lowest priority) Mar. 2006 TPM-W Operator’s Manual Mar. 2006 TPM-W Operator’s Manual...
  • Page 4 Upon receiving the signal, the system sets up this tire as the #1 tire location. The system then moves on to the #2 tire. Mar. 2006 TPM-W Operator’s Manual Mar. 2006 TPM-W Operator’s Manual...