Table of Contents
Advertisement
Quick Links
Table of Contents:
Important Information . . . . . . . . . . . . . . . . . . . . . . . . 2
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installing Your MagFlo Pump . . . . . . . . . . . . . . . . . 4-6
Maintaining Your MagFlo Pump . . . . . . . . . . . . . . 6-8
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Technical Specs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . 8
MagFlo
Product Manual
For Model:
MagFlo
290
(Item
#120930)
Series
™
TM
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ThePondguy MagFlo Series
Summary of Contents for ThePondguy MagFlo Series
- Page 1 MagFlo Series ™ Product Manual For Model: MagFlo (Item #120930) Table of Contents: Important Information . . . . . . . . . . . . . . . . . . . . . . . . 2 Package Contents .
- Page 2 • DO NOT operate during freezing conditions. Drain MagFlo Pump and store in a protected location. IMPORTANT: The Pond Guy is not responsible for equipment damage or failure, losses, injury or death resulting from failure to follow safety precautions, or from misuse or abuse of equipment. thepondguy.com | 866-POND-HELP (766-3435)
- Page 3 * A Venturi adapter can be used to add a small amount of aeration to the water line. To use, attach a standard 1/8” diameter airline tube to the barb of the Venturi adapter, and run the airline tube outside the waterbody (airline tube length will vary depending on pond size). thepondguy.com | 866-POND-HELP (766-3435)
- Page 4 Attach outlet male tubing adapter (E or F) to pump outlet of MagFlo pump (A). Connect and secure your pond tubing to tubing adapter (E or F) with a hose clamp (not included). Connect pond tubing to your waterfall or water feature. Continue to Step 2. thepondguy.com | 866-POND-HELP (766-3435)
- Page 5 Step 3 Plug in Pump Plug the power cord into a standard 120-volt GFCI protected outlet. Step 4 Adjust Water Flow Adjust water flow using the flow control valve (C), if applicable for your installation. thepondguy.com | 866-POND-HELP (766-3435)
- Page 6 Unplug and Remove Unplug the pump and detach from pond tubing. Remove fountain assembly, if applicable. Move pump to a dry workspace. Step 2 Remove Pre-Filter Pull firmly to remove the pump pre-filter from the pump motor. thepondguy.com | 866-POND-HELP (766-3435)
- Page 7 Reassemble Pump Reassemble impeller, impeller cover, impeller screen, pre-filter sponge, and pump pre-filter. (Note: Lower the impeller carefully into the chamber, allowing the impeller to gently drop into the chamber. Too much force can damage the pump.) thepondguy.com | 866-POND-HELP (766-3435)
- Page 8 Please call for a RMA number prior to returning product thepondguy.com by calling our Customer Care Department at 866-766- 3435. Failure to request an RMA number may result in delay or dismissal of your warranty claim. View other great products on-line at www.thepondguy.com...
Need help?
Do you have a question about the MagFlo Series and is the answer not in the manual?
Questions and answers