Download Print this page

Freshtel Netcomm V100 Configuration Instructions

Step 1: Connect your V100

1. Phone – plug in your analog telephone cord.

2. Ethernet Port - use an Ethernet cable to connect your V100 to your router or modem.

3. Power connection - Connect the power to your V100.

4. See your Netcomm V100 User Manual for more connection options.

1. If you have not already done so, install the V100 PC Tool utility on your PC. This would

have come on a CD with your V100, and can also be downloaded from the Netcomm

website:

http://www.netcomm.com.au/Support/downloads.php?Category=VoIP&Products=V100

2. Run the V100 PC Tools Application

Netcomm V100

Configuration Instructions

Table of Contents

Do you have a question about the Netcomm V100 and is the answer not in the manual?

Page 1 2. Ethernet Port - use an Ethernet cable to connect your V100 to your router or modem. 3. Power connection - Connect the power to your V100. 4. See your Netcomm V100 User Manual for more connection options. Step 2: Install the V100 Software Utility.
Page 2 Step 3: Configure the V100 ATA 1. You will need to know your Firefly Number and Password. 2. Click on the SIP tab, then select the Local tab from the below row. Set it up as follows (be sure to use your own Firefly Number and password!):...
Page 3 3. Click on the STUN tab and set it up as follows: 4. Click on the Apply button. 5. Click on the Close button. 6. Your Netcomm V100 is now configured and ready to use the Firefly Network. Simply pick up the phone and dial!
Page 4 Dialling: To dial a Firefly number or voicemail, prefix the number with a star, e.g. *80001234, *123. Freshtel website If you have configured a local dialling prefix for your account via the , you can dial local, national, mobile, and international PSTN numbers exactly as you would from a land line phone in your area;...