Summary of Contents for BOC BASELINE C106/1
- Page 1 A member of The Linde Group User manual BASELINE ® BASELINE ® cylinder and secondary pressure regulators Models: C106/1, C106X/1, C106/2, C106X/2, R104/1 Date: 21/09/2007...
- Page 2 These operating instructions only apply to BASELINE ® pressure control devices supplied by BOC, which accompany these instructions. These products are labeled with the manufacturer‘s name on the operating elements or by direct marking on elements of the pressure controlling parts. These pressure-controlling devices can also be integrated into systems. In which case the corresponding equipment-specific operating instructions apply together with these operating instructions.
- Page 3 2.5 Warranty and liability This equipment is sold by BOC under warranties set forth in the following paragraphs. Such warranties are extended only with respect to the purchase of this equipment directly from BOC or its Authorized Distributors as new merchandise and are extended to the first Buyer thereof other than for the purpose of resale.
- Page 4 BASELINE cylinder and secondary pressure regulators ® 2.6 Particular danger from leakage When using very hazardous, hazardous or slightly hazardous gases, danger to the operator and others can occur should a malfunction or leak develop. Malfunctions of the pressure equipment or operation of relief valves and safeties can result in the release of the hazardous gases into the work environment.
- Page 5 BASELINE cylinder and secondary pressure regulators ® 5. Marking. The nameplate lists the model number, Inlet fitting number and serial number of the pressure equipment as well as the manufacturers name. Caution Only use equipment that corresponds with the type of gas and operating pressures for which it was intended. The maximum intended inlet pressure is listed on the pressure equipment.
- Page 6 BASELINE cylinder and secondary pressure regulators ® 7. Start-up. Danger Before starting operation, check whether the pressure device to be used is suitable for the planned application purpose (type of gas, pressure, material, etc.) Warning Before switching on the pressure device ensure that no one can be endangered by starting operation of the pressure device.
- Page 7 The packaging must be sealed gas-tight to prevent contamination or exposure during transport. 12. Manufacture. BOC reserves the right to make technical enhancements/changes to its products at any time, without notice. BOC reserves all rights.
- Page 8 Getting ahead through innovation. A member of The Linde Group...
Need help?
Do you have a question about the BASELINE C106/1 and is the answer not in the manual?
Questions and answers