Download Print this page

Advertisement

Quick Links

Amerec K2 Steamer Control
and SaunaLogic App
For use with AK Steam Generators
FOR THE SAFETY OF YOU AND YOUR FAMILY PLEASE READ
THE WARNINGS TO THE RIGHT AND ALL INSTRUCTIONS BE-
FORE USING YOUR STEAMBATH.
POST "WARNING" LABEL OUTSIDE STEAM BATH FOR SAFETY
WARNINGS. POSTING IS REQUIRED ON OR ADJACENT TO
STEAM ROOM DOOR FOR ALL COMMERCIAL INSTALLATIONS.
SAVE THIS MANUAL
Thank you for purchasing your new Amerec steam generator. If we can be of any
assistance do not hesitate to call our Technical Support at 1-800-363-0251.
The K2 control is to be used only with a compatible AK steamer from Amerec. If
you have an older AK, contact Tech support for information about upgrading to a
compatible version.
The K2 does not come with a built in temperature sensor so a wall mounted sen-
sor must be installed in the steam bath.
The K2 may be installed on the wall either inside or outside the steam room. Only
one K2 may be installed. If a second control is desired, you may add an optional
K4 On/Off control or a K3 (with temperature and time adjustments). The K3 and
K4 may be installed inside or outside the room.
The K2 comes with a Wi-Fi module which allows using an app in addition to the
K2. The SaunaLogic app is free for android or iOS devices and communicates
with Alexa, Echo and Siri devices. The Wi-Fi module connects to the steamer with
a 25 ft (7,6 m) cable (provided) to allow positioning the module where it will have
the best communications with your Wi-Fi system.
4209-41 08-06-21
Install/Operating Instructions
K2 Steamer Control and App
Technical Support:
1-320-286-3500
The K2 control operates on 5VDC and does
not present a shock hazard. Electric Shock
Hazard - High voltage exists within the steam
equipment. There are no user serviceable parts
in this equipment. All installation and service to
this equipment should be performed by quali-
fied licensed personnel.
Do not exceed 30 minutes in a steam bath.
Excessive exposure can be harmful to your
health. Excessive exposure can produce a
rapid pulse, light-headedness, weakness or
fainting. If you become uncomfortable or
experience any of the above conditions exit the
steam bath immediately.
Steam baths can put stress on the body. There-
fore a steam bath should be used only under a
doctor's direction if you:
Are pregnant
Have diabetes
Have a heart condition
Have high blood pressure
Have circulatory problems
Are under the influence of alcohol
Are under the influence of drugs
Are under the care of a physician
Are in generally poor health
Children should only use the steam bath under
close adult supervision.
Scald Hazard: Do Not Touch the steam head
or trim during operation as they are HOT. Stay
at least 12 inches away from the hot steam
escaping from the steam head.
Be careful when entering a steam bath. Escap-
ing steam from an overheated steam room may
cause injury.
REDUCE THE RISK OF
OVERHE ATING AND SCALDING
1. Exit immediately if uncom fortable, dizzy or slee py. Sta ying too long in
a heated area is capab
2. Supe rvise children at all tim es .
3. Che ck with a doctor bef ore use if pregnant, diabeti c, in poor health or
under medical car e.
4. Breathing heated air in conjunction with consumption of alcohol, dr
or medication is capab le of causing unconsciousnes s.
CA UTION!
REDUCE THE RISK OF
SLIPPING AND
Use care when enter ing or e xiting the steam room, floor ma y be slippe ry.
NO TE: For additional saf ety instr uctions, see o wner's manual .
1-800-363-0251
support@amerec.com
WARNING
WARNING
le of causing overheating .
Do not contact steam head . Sta y at least 12" away
from hot steam escaping from the steam outlet .
FALL INJU RY
Page 1
ugs

Advertisement

loading
Need help?

Need help?

Do you have a question about the K2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Amerec K2

  • Page 1 REDUCE THE RISK OF OVERHE ATING AND SCALDING The K2 control is to be used only with a compatible AK steamer from Amerec. If 1. Exit immediately if uncom fortable, dizzy or slee py. Sta ying too long in a heated area is capab le of causing overheating .
  • Page 2: Important Safety Instructions

    Install/Operating Instructions K2 Steamer Control and App IMPORTANT SAFETY INSTRUCTIONS 1. READ AND FOLLOW ALL INSTRUCTIONS. 2. WARNING - To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times.
  • Page 3 K2 CONTROL OVERVIEW The K2 control is a low voltage wired control for use with Amerec’s AK series steam generators. The control requires an 8 con- ductor CAT-5 cable (provided) to connect to the steamer. A temperature sensor (required) mounts inside the steam room and connects to the steam generator.
  • Page 4 Install/Operating Instructions K2 Steamer Control and App K2 OPERATION Display shows current bath temperature and bath time remaing while bath is on. 4209-41 08-06-21 Technical Support: 1-320-286-3500 1-800-363-0251 support@amerec.com Page 4...
  • Page 5 K2 Control Display When power to the steamer is turned on, the K2 will set-up its program and display the software version (such as S011) for about 5 seconds then the display will turn off. While the bath is on, the display alternates between showing the current bath temperature and the time remaining before the bath automatically turns off.
  • Page 6 Bath Time and adjust the length of delay you want. When finished, the NOTE: The complete App display is bath will turn off and the displays on the K2 and the App will alternately shown above. The operations shown on show delay and the time remaining before the bath starts.
  • Page 7: General Information

    The displays on the K2 and App show more than just the temperature (and remaining bath time on the K2) K2 Program When power is turned on to the steam generator, The K2 will start up, then show its software version for 5 seconds.
  • Page 8 Yellow - Aqua - Purple - Rotating colors - Off. • The K2 may be used to dim the lights. On the K2, turn the lights on then use the + and - to adjust the brightness up or down. The light output can be adjusted to 25, 50, 75 or 100% of full brightness. The app cannot adjust brightness.