Gearwrench 88757 Quick Start Manual

Instruction Manual & Product Warnings
Manuel d'emploi et avertissements sur le produit pour la pièce GEARWRENCH
Manual de instrucciones y advertencias del producto de las piezas GEARWRENCH:
88757 - D Ring Web Tether w/ Cord Loop, 10PC
GEARWRENCH D-Ring Web Tether with Corded Loop are only intended for use as part of a tethering system and use with tools
meeting the following specifications:
- Total tool weight under 5 lbs. (2.26kg)
- Tool includes a manufactured drilled tether through hole that the corded loop can be clinched to
- If tool does not include a manufactured tether through hole, a closed handled tool (for example found on scissors) that
the corded loop can be clinched to
Installation for closed handled tools
1. Weigh the tool to be used with the D-Ring Corded Loop. The tool weight must be below the D-Ring Corded Loops maximum
working load capacity of 5 lbs. (2.26 kg)
2. Ensure the cinching of the D-Ring Corded Loop to the tool will not interfere with the safe working condition of the tool
3. With the corded end of the D-Ring with Corded Loop pass the cord through the handle of the tool
4. Pass the Ring side of the D-Ring Corded Loop through the loop of the Cord
5. To create a secure connection pull tightly to clinch, and the connection point will be created
Installation for tools with existing pre-manufactured tether through holes
1. Weigh the tool to be used with the D-Ring Corded Loop. The tool weight must be below the D-Ring Corded Loops maximum
working load capacity of 5 lbs. (2.26 kg)
2. Ensure the cinching of the D-Ring Corded Loop to the tool will not interfere with the safe working condition of the tool
3. With the corded end of the D-Ring with Corded Loop pass the cord through the tether through hole of the tool
4. Pass the Ring side of the D-Ring Corded Loop through the loop of the Cord
5. To create a secure connection pull tightly to clinch, and the connection point will be created
WARNINGS:
- NEVER use GEARWRENCH D-Ring Web Tether with Corded Loop to connect anything over 5 lbs. (2.26kg)
- GEARWRENCH D-Ring Web Tether with Corded Loop are Not Personal Protective Equipment
- Always use GEARWRENCH D-Ring Web Tether with Corded Loop with the recommended length of tethering accessories
- Do not use GEARWRENCH D-Ring Web Tether with Corded Loop as part of a tethering system around moving or rotating
equipment
- GEARWRENCH D-Ring Web Tether with Corded Loop will not support human weight as part of a tether connection point
- Inspect GEARWRENCH D-Ring Web Tether with Corded Loop for wear before each use. Do not use if evidence of wear.
MADE IN CHINA - LIMITED 1 YEAR WARRANTY FOR MANUFACTURING DEFECTS EXCLUDING NORMAL WEAR AND TEAR
88757