Advertisement
Timeclock Guide – ATS 700 Wi-Fi
Overview:
Installing the ATS Wi-Fi Adapter
Configure the ATS 700 timeclock to connect to your Wi-Fi network
Installing the ATS Wi-Fi Adapter
1) Power the timeclock off
2) Unlock the ATS 700 timeclock
3) Insert the RAlink Wi-Fi adapter with antenna into an available USB port.
4) Power the timeclock back on.
Configure the ATS 700 Timeclock for Wi-Fi
1) On the timeclock, tap the Wrench Icon
2) Enter the Setup Password (Common passwords: 1234 or clock's serial number), Tap Enter
3) Tap Setup
Copyright © 2020 ADP, Inc. ALL RIGHTS RESERVED. ADP, the ADP logo and Always Designing for People are trademarks of ADP, Inc. ADP Confidential.
Adapter Installation Guide
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Adp ATS 700
Summary of Contents for Adp ATS 700
- Page 1 2) Enter the Setup Password (Common passwords: 1234 or clock’s serial number), Tap Enter 3) Tap Setup Copyright © 2020 ADP, Inc. ALL RIGHTS RESERVED. ADP, the ADP logo and Always Designing for People are trademarks of ADP, Inc. ADP Confidential.
- Page 2 Note: If your network does not appear > Enter the network name in the Hidden SSID field. This field is case sensitive. Copyright © 2020 ADP, Inc. ALL RIGHTS RESERVED. ADP, the ADP logo and Always Designing for People are trademarks of ADP, Inc. ADP Confidential.
- Page 3 In some cases, we may ask for your IT or internet service provider to be involved to verify network settings. Copyright © 2020 ADP, Inc. ALL RIGHTS RESERVED. ADP, the ADP logo and Always Designing for People are trademarks of ADP, Inc. ADP Confidential.
Need help?
Do you have a question about the ATS 700 and is the answer not in the manual?
Questions and answers