Page 1
User Manual Power on/off Auto power on: Open the charging case and put out the earphones. They will automatically start up and connect to your device. Manual power on: In the shutdown state, press and hold the touch key for more than 3 seconds to start the earbuds.
Page 2
Open the charging case and take out the earphones. After that turn on Bluetooth function on your phone. Find and select SWISSTEN StoneBuds in the list of Bluetooth devices. TIP: If you want to connect the same phone again, open the charging case and the earphones will reconnect automatically.
Page 3
Charging case Use the Micro USB cable to charge the charging box, and the blue light will be on when charging, Specifications: Bluetooth Version: v5.0 True Wireless Stereo – TWS Operation Range: 10m Earphones Batteries: 2x45 mAh Case Battery: 300 mAh Working Time: 2,5hrs Charging cable: Micro USB (included package) Charging Time: 2 hrs...
Page 4
Manuální vypnutí: Pokud jsou sluchátka zapnutá, klepněte a podržte dotykové tlačítko po dobu delší než 5 sekund. Bluetooth párování Otevřete nabíjecí pouzdro a vyndejte sluchátka. Poté zapněte na svém mobilním telefonu funkci Bluetooth a v seznamu Bluetooth zařízení zvolte SWISSTEN StoneBuds.
Page 5
TIP: Pokud chcete připojit již jednou spárované zařízení, otevřete nabíjecí pouzdro a vyndejte sluchátka. Ty se připojí automaticky znovu. Ovládání Hudba Přehrávání/pauza: Pro pozastavení přehrávání jednou klepněte na sluchátko. Pro pokračování přehrávání pak opět klepněte na sluchátko. Předchozí skladba: Dvakrát klepněte na levé sluchátko. Další...
Page 6
Specifikace: Verze Bluetooth: v5.0 Bluetooth dosah: 10 m Baterie sluchátek: 2x45 mAh Kapacita baterie pouzdra: 300 mAh Doba hraní, volání: 2,5 hodiny Nabíjecí kabel: Micro USB (součást balení) Doba nabíjení: 2 hodiny Velikost pouzdra: 70 x 39 x 31 mm Profily BT: A2DP, AVRCP V1.5, HFP V1.6, HSP V1.2 Frekvence Odezva: 20 Hz - 20 kHz Citlivost: 105 dB SPL (hladina akustického tlaku ustálená) při 1 kHz...
Need help?
Do you have a question about the Stonebuds and is the answer not in the manual?
Questions and answers