SOOTHER STERILIZER AGU PS1 UV CONTENTS Introduction ........................ 3 List of symbols ......................4 Scope of application ....................5 Complete set .......................5 Basic specifications ....................6 Device description .....................7 Guidelines for safe operation ................8 Before you start ...................... 10 Operation principle and procedure..............11 Cleaning and care ....................
INTRODUCTION Dear friends, thank you for choosing our products! Soother sterilizer AGU PS1 UV is a modern, simple and easy to use highly efficient device that allows you to quickly disinfect baby soothers, bottle nipples, teethers and many other accessories.
LIST OF SYMBOLS Symbol Meaning The product complies with the essential requirements of: • Electromagnetic Compatibility Directive 2014/30/EU; • Low Voltage Directive 2014/35/EU; • Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and elec- tronic equipment.
SCOPE OF APPLICATION Soother sterilizer AGU PS1 UV is designed to disinfect baby soothers, bot- tle nipples, teethers and other accessories. If you use the sterilizing ele- ment separately from the sterilization container, you can disinfect many oth- er items such as cell phones, toys, remote controls, eyeglasses and other household items.
BASIC SPECIFICATIONS Type Ultraviolet soother sterilizer Model AGU PS1 UV Power supply ICR 14500, 700 mA/h, DC 3.7 V battery Battery life, min About 150 Charging port micro-USB Type of sterilization Ultraviolet, in the UV-C range (200 – 280 nm)
6. ON/OFF button & Light indicator – 1 pc. 7. Micro-USB port – 1 pc. 6.2. Operating modes Soother sterilizer AGU PS1 UV can be used in two operating modes: • the sterilizing element (top cover) is used in combination with the steri- lization container;...
6.3. Protective elements The device uses two protective elements: • Micro switch. Ensures UV protection during operation when the steriliz- ing element is used in combination with the sterilization container. Disa- bles the device when the top cover is opened. •...
Page 9
Remember to close the top cover of the sterilizer before use. Direct exposure to the light produced by the UV LEDs of the device may damage the eyes. Always switch off the device before opening the top cover. Do not switch on the device if the sterilizing element is turned by an angle of 90°...
15. It is recommended that you charge the device every month to extend the battery life if you do not use it often. 16. Please do not use a low-quality USB charging cable. 17. Keep the device out of the reach of children. Do not allow children to use the device as a toy.
OPERATION PRINCIPLE AND PROCEDURE 9.1. Combined use of the sterilizing element and the steriliza- tion container. 1-minute/3-minute sterilization mode. 9.1.1. Rinse the soother or nipple before sterilization. 9.1.2. Wipe it clean to remove debris and remaining water. 9.1.3. Place the soother or nipple in the sterilization container and close the cover.
Page 12
9.1.6. The indicator on the button will light up steadily to indicate that the sterilization process has begun. 9.1.7. When the sterilization process is complete, the device will switch off automatically. The indicator light will go out. 9.1.8. You can switch off the device yourself by pressing the ON/OFF button.
Page 13
9.2.2. Detach the sterilizing element (top cover) from the sterilization container by pulling it in the direction of the arrow. 9.2.3. Now you can use the ster- ilizing element separately. 9.2.4. While holding the steriliz- ing element over the items to be sterilized in the position shown in the figure below, press the ON/OFF button twice to activate...
Pay attention to a number of important recommendations for using the sterilizer in manual sterilization mode: • Try to keep the sterilizing element level during the steriliza- tion process. • Keep the sterilizing element no more than 2-3 cm away from the items to be sterilized.
10.2. Cleaning the body of the sterilization container To keep the device hygienic, the sterilization container can be washed with warm soapy water, having previously disconnected the sterilizing element from it. Remove all water droplets and completely dry the sterilization container before using the device to prevent electrical damage by mois- ture.
UV LEDs do not Cover-open detec- Check cover-open when tion micro switch is detection micro switch the sterilization contaminated for contamination. Wipe it container cover clean with a piece of cloth is opened Cover-open detec- Please contact a special- tion micro switch is ized service center to diag- defective nose and rectify the prob-...
Directive 2006/66/EU. If you have any questions, please contact the local public utility responsible for waste disposal. CERTIFICATION Soother sterilizer AGU PS1 UV complies with: • Electromagnetic Compatibility Directive 2014/30/EU; • Low Voltage Directive 2014/35/EU;...
The device alterations without the manufacturer’s permission will void the warranty. For repair and maintenance, please contact a specialized service center (for more information, please visit www.agu-baby.com). Date of manufacture and importer information are specified on the individ- ual package.
Need help?
Do you have a question about the Fay and is the answer not in the manual?
Questions and answers