S5. Replacement Parts List - Panasonic DMC-LX1PP Service Manual

S5. REPLACEMENT PARTS LIST

1.* Be sure to make your orders of replacement parts according to this list.
Note:
2. IMPORTANT SAFETY NOTICE
Components identified with the mark
When replacing any of these components, use only the same type.
3. Unless otherwise specified,
All resistors are in OHMS, K=1,000 OHMS. All capacitors are in MICRO-FARADS (uf), P=uuF.
4. The P.C.Board units marked width " " show below the main assembled parts.
5. The marking (RTL) indicates the retention time is limited for this item. After the discontinuation
of this assembly in production, it will no longer be available.
6. Supply of CD-ROM, in accordance with license protection, is allowable as replacement parts
only for customers who accidentally damaged or lost their own.
E.S.D. standerds for Electrostatically Sensitive Devices, refer to "PREVENTION OF
ELECTROSTATIC DISCHARGE (ESD) TO ELECTROSTATICALLY SENSITIVE (ES) DEVICES"
section.
Definition of Parts supplier:
1. Parts marked with [MBI] in the remarks column are supplied from
"Matsushita Battery Industrial co., ltd.".
2. Parts marked with [PAVC-CSG] in the remarks column are supplied from
PAVC COMPANY CS Group (PAVC-CSG). Others are supplied from MKE SAIJYO (MKE).
have the special characteristics for safety.
S-17