IMPORTANT PLEASE READ THESE SAFETY INSTRUCTIONS GENERAL SAFETY IMPORTANT 1. Read carefully and keep these instructions in a safe place. ALL PLUMBING MUST BE COMPLETED 2. Use this product only for its intended function and BY A LICENSED PLUMBER do not use attachments not recommended by the manufacturer.
Page 3
POSITIONING DIAGRAM A Wall 80 3.1 315[12.4] 1230 48.4 1310 51.5 If washing from behind, allow a minimum of 400mm of space behind your washlounge to provide room for access. DIAGRAM B 3200 (126”) (15.75”) (31.5”) (31.5”) (31.5”) (15.75”) (2”) (4”) (4”) (4”)
Page 4
GET STARTED BEFORE INSTALLATION SECURE AND BOLT DOWN FOOTPRINT THE WASHLOUNGE MUST BE SECURED TO THE FLOOR. Making sure your wash lounge is supported from behind, remove the back panel by unscrewing the two screws located on the left and right of the access panel.
Page 5
INSTALLATION & ASSEMBLY: BASIN & STAND BASIN ASSEMBLY DIAGRAM D Opening at back of chair Steel frame Bolts (supplied) Stainless steel cover Ceramic basin with Avitar Tilt. · Undo bolts and remove steel frame from the opening of the back of chair. ·...
PLUMBING DIAGRAM C INSTALLING BASIN TO STAND STEP ONE STEP TWO WASHLOUNGE / STAND INSTALLATION Washlounge MUST be secured to the floor. Secure to the floor using 2 x Dyna bolts (supplied). BASIN INSTALLATION 2. Remove washer & springs from the basin 3.
Damaged and broken parts should be replaced and loose fasteners tightened. All maintenance to be carried out by a suitably qualified tradesperson. HOW TO CHANGE A SHOWERHEAD OR SHOWERHOSE Please view our online how to videos and further troubleshooting: https://help.comfortel.com.au/hairdressing-basins/...
#2423 STELLA WASHLOUNGE (WHITE BASIN) #2424 STELLA WASHLOUNGE (BLACK BASIN) Comfortel Furniture Pty Ltd. assumes no responsibility for any errors that may appear in this document nor does it make expressed or implied warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
Need help?
Do you have a question about the stella 2423 and is the answer not in the manual?
Questions and answers