Let's Go Aero ArcHaus Moon Assembly & Use Manual

Advertisement

Quick Links

NOTICE: All Manual information is subject to change without notice. Revised editions
will be available for free download at LetsGoAero.com. Manual information is considered
factual until made obsolete by a revised version.
Follow this QR-Code or visit
LetsGoAero.com/manuals to check for an updated version

STEP 1

Lay the Steel U-Tube Poles [A] on the
ground and place them approximately 10ft
apart. [Fg. 1]
Clip the Floor Straps to the Steel U-Tube
poles as shown. [Fg. 2]
[Fg.2]
Copyright© 2022, Lets Go Aero, Inc., All rights reserved.
MOON UNIT SHELTER-010322Rev
ASSEMBLY & USE GUIDE
[Fg.1]
B
A
ArcHaus Moon Unit Shelter
QTY. DESCRIPTION
A
2
STEEL U-TUBE POLES
B
2
FLOOR STRAPS
C
2
SADDLE POLE
D
1
SADDLE POLE WITH C-CLIP
E
5
SPANNER POLES
F
5
BUNGEE
G
1
MOON UNIT COVER
H
1
FULL DOOR PANEL
J
2
TENT DOOR PANEL
K
2
TAILGATE CONNECTOR PANEL
L
1
8' X 10' FLOOR
M
8
STAKES
For More Information & Accessories, Visit our Website -
www.LetsGoAero.com
For Technical Support & Product Questions Contact Us at
877-464-2376 or 719- 630-3800
Email: Support@LetsGoAero.com
B
A
Page 1 of 5
Overland Edition
Part No. ARC02226
PARTS
A
B
PATENTPROTECTED

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ArcHaus Moon and is the answer not in the manual?

Questions and answers

Summary of Contents for Let's Go Aero ArcHaus Moon

  • Page 1 ArcHaus Moon Unit Shelter Overland Edition Part No. ARC02226 ASSEMBLY & USE GUIDE PARTS QTY. DESCRIPTION STEEL U-TUBE POLES FLOOR STRAPS SADDLE POLE SADDLE POLE WITH C-CLIP SPANNER POLES BUNGEE MOON UNIT COVER FULL DOOR PANEL TENT DOOR PANEL TAILGATE CONNECTOR PANEL 8’...
  • Page 2 STEP 2 STEP 4 Attach all Spanner Poles [E] (five total) to the Saddle Slide the Long Saddle Poles [C] into the Steel U-Tube Poles with C-Clip [D] as shown. [Fg. 6] Poles [B] so the saddle poles run parallel to the Floor Straps.
  • Page 3 STEP 6 TAILGATE VEHICLE CONNECTION Pull the corners and side flap of the Cover [G] underneath [Fg. 14] the Steel U-Tube poles [A]. [Fg. 10] At corners: Attach the Ring and Hook together. [Fg. 12] At side flap: Connect and tighten buckle clip. [Fg. 11] Pull center bungee tight after all corner connections and center buckle have been secured.
  • Page 4 SAFE USE & MAINTENANCE GUIDELINES • We advise you to assemble this product at least once at home before going on a trip. Obtaining a familiarity with the assembly process will help ensure your satisfaction and ease when setting up in the outdoors. •...
  • Page 5 TROUBLESHOOTING GUIDE PROBLEM SOLUTION Condensation is the build-up of moisture on the inside of the tent walls due to a temperature difference between the inside and the outside of your tent. Condensation occurs mostly when conditions are cold, rainy, or humid. The best 1.

This manual is also suitable for:

Arc02226

Table of Contents