Related Manuals for Taxitronic IR32
Summary of Contents for Taxitronic IR32
- Page 1 INTERFACOM, S.A. 13/08/2015 INSTALLATION MANUAL TAXITRONIC PRINTER IR32 Manual inst. IR32. EN.doc 14/12/04...
- Page 2 INTERFACOM, S.A INDEX 1. ASSEMBLY 2. ELECTRIS INSTALLATION 3. SEALING 4. MAINTENANCE Manual inst. IR32. EN.doc...
- Page 3 INTERFACOM, S.A 1. ASSEMBLY (Plan 1) - The mechanical installation of the IR32 printer is very easy due to its small dimensions. - It can be built in and also can be attached directly to the panel, for this purpose it has on the back side two moorings for the self-tapping screw, they are located in the connector cover, which allow several installation possibilities.
- Page 4 INTERFACOM, S.A 3. SEALING - The sealing of the IR32 printer is done at the front part, blocking the access to the screw that closes the box and the installation. 4. MAINTENANCE (Plans 4, 5) - To open the two casings of the device, you must follow the steps shown in plan - To change the paper roll of the printer, you must follow the steps shown in plan Manual inst.
Need help?
Do you have a question about the IR32 and is the answer not in the manual?
Questions and answers