DiscountRamps TD-600 Instructions

Trailer dolly

Table of Contents

Download this manual

General Guidelines

• It is the user's responsibility to read and follow all instructions.

• Keep these instructions with the product at all times and review before each use.

• It is the responsibility of this product's owner to furnish the instructions to any person that borrows

or purchases the product.

• Inspect the product before use to ensure it is assembled properly and all parts are in safe working

order and free of defects.

• Never modify this product in any way.

• All circumstances cannot be addressed in these instructions. Please use common sense and

practice general safety measures when using this product.

• Parts and/or instructions are subject to change without notice.

• Keep hands and feet out from under the trailer tongue while hitching, unhitching, or moving the

trailer. Keep children at a safe distance.

• Always make sure the trailer is supported properly while engaging the trailer dolly.

• Always make sure the trailer tongue is securely connected to the trailer dolly coupler ball before

attempting to move the trailer.

• Take precautions to prevent uncontrolled movement of the trailer once it is connected to the trailer

dolly. Be aware that the slope of a road surface is difficult to judge and the pull of gravity can result

in a dangerously out of control trailer.

• If the trailer dolly is being connected to a trailer which is being stored over a lengthy period of time,

make sure both the trailer and the trailer dolly are chocked properly.

• Keep the trailer dolly clean and free of debris. Inspect before each use and periodically lubricate

moving parts.

• Two 17mm Wrenches

Rev. 061518

Trailer Dolly

Instructions for Part # TD-600

DiscountRamps.com • 1-888-651-3431

Page 1

Table of Contents

Do you have a question about the TD-600 and is the answer not in the manual?

Page 1 Trailer Dolly Instructions for Part # TD-600 General Guidelines • It is the user’s responsibility to read and follow all instructions. • Keep these instructions with the product at all times and review before each use. • It is the responsibility of this product’s owner to furnish the instructions to any person that borrows or purchases the product.
Page 2 M19 Lock Washer Handle M19 Nut Tow Bar M10x65 Bolt Bracket M10x50 Bolt Axle M10 Washer Wheel M10 Lock Nut Cotter Pin Assembly Step 1. Insert the axle (G) into the base frame (A). Rev. 061518 Page 2 DiscountRamps.com • 1-888-651-3431...
Page 3 (O), washer (P), and lock nut (Q). Step 5. Insert the tow ball (K) into the holes in the brace (C) and base frame (A), the secure with the lock washer (L) and nut (M). Rev. 061518 Page 3 DiscountRamps.com • 1-888-651-3431...
Page 4 Rev. 061518 Page 4 DiscountRamps.com • 1-888-651-3431...