Philips OLED706 Series User Manual page 31

Shop Setup
Adjust shop settings
 Settings > General settings > Shop setup.
If the display is set to Shop, you can set the
availablility of a specific demo for in store use.
Adjust Picture and audio
 Settings > General settings > Shop setup >
Picture and audio.
Select Optimized for shop or custom for picture and
audio settings.
Demo Me autostart
 Settings > General settings > Shop setup >
Demo Me autostart.
Turn On/Off the Demo Me autostart.
OLED refreshing process
 Settings > General settings > Shop setup >
OLED refreshing process.
Select Refresh OLED (every 4 hours) to refresh your
OLED screen every 4 hours. Select Off to switch off
OLED refreshing process. Switching off this process
may result in image retention, which may void your
warranty.
AI Picture demo autostart
 Settings > General settings > Shop setup > AI
Picture demo autostart.
Turn On/Off the AI Picture demo autostart.
On AI Picture demo mode, you can see how AI
Picture mode improves the picture quality. The demo
mode includes below parts.
1 - Split screen to show live visual effect, left half
screen with AI picture functions turned off, right half
screen will have full AI picture settings applied. It tells
the differences after Contrast enhancement, Colour
enhancement, Sharpness enhancement,
Noise/artefact reduction and Motion compensation.
2 - Small screen in FHD graphics plane to show sub-
sampling of live video. Sub-sample picture, sharpness
delta map, quantization heat map, PNR high-lights
live video will be shown in looping sequence.
3 - Contrast meter: histogram plot is updated 4 times
per second.
4 - Half-moon shape meters to show the status of
Sharpness, Noise, Motion and Colour.
5 - Scene Classification: Output Live scene
classification category (0 to 100% to indicate
confidence level for each category), each items will
be updated 3 times per second.
EasyLink - HDMI CEC
Connect HDMI CEC-compatible devices to your
display, you can operate them with the display's
remote control.
EasyLink HDMI CEC must be switched on on the
display and the connected device.
Switch on EasyLink
 Settings > General
settings > EasyLink > EasyLink > On.
Operate HDMI CEC-compatible devices with display
remote control
 Settings > General
settings > EasyLink > EasyLink remote
control > On.
Note:
• EasyLink might not work with devices from other
brands.
• The HDMI CEC functionality has different names on
different brands. Some examples are: Anynet, Aquos
Link, Bravia Theatre Sync, Kuro Link, Simplink and
Viera Link. Not all brands are fully compatible with
EasyLink. Example HDMI CEC branding names are
property of their respective owners.
HDMI Ultra HD
It can display Ultra HD signals. Some devices -
connected with HDMI - do not recognise a display
with Ultra HD and might not work correctly or show
distorted picture or sound.
To avoid the malfunctioning of such a device, you can
adjust HDMI Ultra HD setting when the display is in
the HDMI source. Recommended setting for legacy
device is Standard.
Set the signal quality for each HDMI connectors
 Settings > General settings > HDMI Ultra
HD > HDMI (port) > Standard, Optimal, or Optimal
(Auto Game).
To change the settings, switch to the HDMI source
first. Select Optimal to enable the highest quality
HDMI signal for 4K Ultra HD and HDR content (4K120
4:4:4, 4K120 10 or 12-bit HDR).
• The setting Optimal allows maximum up to Ultra HD
31