Advertisement
Available languages
Available languages
Quick Links
intimus 331
intimus 363
intimus 960
(optional with stand)
DP
DP 19028
Instructions for Guillotine
Manual pentru Ghilotina
intimus 331
intimus International GmbH
Bergheimer Straße 6-12
88677 Markdorf
Germany
www.intimus.com
UK
ROM
95506 2 08/19
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Intimus 331
Summary of Contents for Intimus 331
- Page 1 331 Instructions for Guillotine Manual pentru Ghilotina intimus 331 intimus 363 intimus 960 (optional with stand) intimus International GmbH Bergheimer Straße 6-12 88677 Markdorf Germany www.intimus.com 95506 2 08/19 DP 19028...
- Page 2 331 IMPORTANT: Before using the Guillotine, fix and never remove the plexiglass guard which comes provided (1). When the machine is not used, keep the blade down in a closed position. If the blade doesn`t stay up due to the wear of the fulcrum, adjust by tightening the screw (9) and the nut (10).
-
Page 3: Maintenance
331 intimus 331 Maintenance of the blade and the counter blade ASSEMBLY The guillotine is to be used for cutting paper*; any other material may Unscrew the two screws from the hand press (2) and remove the paper lead to the premature usage of the blade and counterblade or to the sheets from the protection which is in plexiglass (1), position the latter damage of the cutting edges. -
Page 4: Date Tehnice
331 intimus 331 ASAMBLARE Important notes after assembling the blade and the counterblade Desfiletati cele doua suruburi (4) de pe sistemul de presare (2) si indepartati folia protectoare de pe plexiglas, pozitionati-l pe acesta din For having an optimum cut after installing the handle with blade on the... - Page 5 331 intimus 331 THE SETTING OF THE BLADE HOLDER REGLAJUL PORTALAMEI The setting of the blade holder The Free fall of the hand lever or the reduction of the cutting effect resulted by the wear in time of the blade and the counter blade can be reshuffled trough the following steps: Unscrew of the nut Fig.
- Page 6 331 intimus 331 Changing the blade and the counter blade When the cutting edges of the blades or counter blade presents rupter or wear, cutting can not be made in optimal parameters, fact that these must be changed or sharped.
Need help?
Do you have a question about the 331 and is the answer not in the manual?
Questions and answers