Advertisement

Quick Links

Ceramic hair iron
Tenera
EN
Instruction manual
Tenera

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Tenera and is the answer not in the manual?

Questions and answers

Summary of Contents for Orava Tenera

  • Page 1 Ceramic hair iron Tenera Instruction manual Tenera...
  • Page 2: General Safety Instructions And Warnings

    ORAVA electrical appliances are manufactured according to state-of-the-art knowledge and recognized safety regulations. Nevertheless, improper or improper use or improper use may result in injury or endangerment to the life of the user or a third party, or to a third party.
  • Page 3 • Use the appliance only for the intended purpose and in the manner specified by the manufacturer. • The appliance is intended for home and similar indoor use without special focus. • This appliance is intended, in addition to domestic use, for the following uses: - in shops, offices and other similar work environments;...
  • Page 4 1.3 Electrical safety • Before connecting the appliance to the power supply for the first time, make sure that the voltage on the appliance label corresponds to that of the household electrical outlet. • The electric appliance is designed to power from 1 / N / PE ~ 230 V 50 Hz. •...
  • Page 5 • Do not bend, crush or otherwise expose the power cord of the appliance to mechanical stress or external heat sources. Damage to the power cord may result in electric shock. • When the power cord is damaged, disconnect the appliance from the mains and do not use it again.
  • Page 6 1.5 Cleaning, maintenance and repairs • Observe the normal user cleaning and maintenance of the appliance in the recommended way. Do not use solvents or harsh cleaners for cleaning. Pollution and visible stains from finger contact, respectively. The hands can be cleaned using detergent detergents specially designed to clean household appliances.
  • Page 7 2. Special Safety Instructions. Read carefully! • Electrical equipment is designed and manufactured in such a way as to allow for safe operation and use by persons without a professional qualification. Despite all the measures taken by the manufacturer to ensure safe use, handling and use, it carries with it some residual risks and associated potential hazards.
  • Page 8 Check/Commissioning • We recommend performing both initial and subsequent regular product inspections. Use the device only with accessories and spare parts supplied and approved by the manufacturer. • Never use the appliance if it is incomplete, damaged, or if parts or accessories (eg due to fall) have been damaged during use.
  • Page 9 • Do not leave the device plugged into a power socket unattended. • Do not use the device if the main power switch does not work on the device. • The appliance must be kept dry. • Do not use the appliance where there is dripping or splashing water.
  • Page 10 Warning! • Do not use or place the appliance in a place where children may reach freely. The appliance may shif on children and cause serious injury to them. • Mechanical damage (breakage or breakage of parts and covers) of the device can cause serious injury. Do not use the damage device.
  • Page 11 Warning! • The appliance must not be left unattended when connected to mains. • Never leave your device unattended and freely accessible and do not hang it with a freely-hanging power cord. Children, inappropriate persons or animals could pull out the device for the power cord.
  • Page 12 Characteristics • The appliance is designed for ironing (straightening) hair using high temperature ceramic plates. • New generation ceramic plates • Instant heating to high temperature - ready in 15 seconds • Electronic temperature setting on LED - 150 - 230 °C •...
  • Page 13: Parts Descriptions

    Parts descriptions 1 Straightening ceramic plates 2 LED indicators (5 indicators are displayed sequentially during warm-up, the corresponding number of indicators is lit when the temperature is reached) 3 Lock switch 4 Temperature setting buttons + and - 5 On/Off switch 6 Main cord with 360°...
  • Page 14: Operation

    Operation 1 Make sure that the power cord is not wrapped around the machine before commissioning. 2 Connect the power cord to a 230 V/50 Hz electrical outlet. 3 Turn on the device by pressing and holding the ON/OFF switch for about 2 seconds.
  • Page 15 6 Before adjusting the rest of the hair, try the iron on a small part of the hair and then adjust the temperature setting up or down as necessary. If you find that you need a higher temperature setting when straightening your hair, simply adjust the temperature to a higher temperature.
  • Page 16: Cleaning And Maintenance

    Cleaning and maintenance Regular, long-term cleaning is required to ensure proper and long-term operation. • The equipment has been carefully inspected and pre-shipped and packaged. • Clean the machine after each use with a cleaning cloth and remove any hair that has become trapped.
  • Page 17: Technical Specifications

    Technical specifications Power supply: 230 V / 50 Hz Power: 50 W Operating temperature: 150 - 230 ° C Dimensions (W x D x H): 3.7 x 3.7 x 29 cm Weight: 0.3 kg Subject to change!
  • Page 18 Producer: ORAVA retail 1, a.s. Seberíniho 2 821 03 Bratislava Slovenská republika Importer: ORAVA retail 1, a.s. ORAVA distribution CZ, s.r.o. Seberíniho 2 Ostravská 494 821 03 Bratislava 739 25 Sviadnov Slovenská republika Česká republika DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT The symbol on the product or on its packaging indicates that this product does not belong to household waste.

Table of Contents