Transmission Display; Starting The Engine; Selector Lever - Opel ADAM 2016 Owner's Manual

Transmission display

In automatic mode, the driving
programme is indicated by D in the
Driver Information Centre.
In manual mode, M and the number
of the selected gear is indicated.
R indicates reverse gear.
N indicates neutral.

Starting the engine

To start the engine, depress the brake
pedal, if transmission is not in N.
Transmission automatically shifts to
N upon starting. There may be a slight
delay.
Downloaded from ManualsNet.com
Starting is not possible if all brake
lights fail.
Stop-start-system
Autostop
If the vehicle is at a standstill and
brake pedal is operated, Autostop is
activated automatically.
The engine will be switched off while
the ignition stays on.
An Autostop is indicated by the
needle at the AUTOSTOP position in
the tachometer.
search engine
Driving and operating
Autostart
Release the brake pedal or move
selector lever out of D to restart the
engine.
The engine restart is indicated by the
needle at the idle speed position in
the tachometer.
The stop-start system will be disabled
on inclines of 15% or more.
Stop-start-system 3 130.

Selector lever

135