Advertisement
• Before use, make sure all screws are tighten securely.
• Perform maintenance regularly. Before use make sure the machine is in good working conditions
and without any damage.
• Use only original spare parts during repairs.
• Using non-original spare parts or other parts not approved by the manufacturer may cause injury to the
operating personnel.
• Use this machine only for work that is capable of handling. Do not overload tools, accessories or the
machine. For large work volume use more powerful machine.
• Do not overload your device. Measure the work load in such way, so it could be done with comfortable
speed. The warranty does not cover damages caused by overloads.
• Do not expose to extremely high temperature or direct sunlight.
• This machine is not designed for use in humid environments or under water.
• if you are not using your machine, store it in a dry and safe place, out of reach of children.
• Before turning your device on, make sure that all safety elements are working properly and effectively.
Make sure all moving parts are in good working conditions.
• Before use make sure that no part is cracked or stuck, Make sure all parts are attached and assembled
as designed. Beware of all other conditions that may have a negative effect on the proper functioning of
your device.
• If not stated otherwise in this manual, all damaged parts must be repaired or changed.
Riveting
• Do not use the machine unless completely assembled according to instructions contained in this manual.
ASSEMBLY
• Before throwing the packaging material out, make sure no part is left inside. If so, take it out and install it.
Use the part listing for check-up and the installation drawing for guidance.
OPERATION
Riveting head drawing (dimensions in mm)
4
about 75
Advertisement
