Page 1
SURE-FEED BROADCASTER MODEL I-258 Instructions for Assembly, Mounting, Operating, and Maintenance. The Herd Model I-258 Broadcaster is designed to be mounted to farm tractors, pickup trucks, UTVs, or garden tractors. For mounting recommendations, please contact us. Use of this seeder with any mounting not manufactured and recommended by the...
MODEL I-258 General Instructions 1. For Normal broadcasting of seeds, this model I-258 seeder requires no changes. It was assembled at the factory for this purpose. 2. This model may be mounted via one of our mounting kits (i.e. #660 2” receiver hitch, Carton JPH-1, etc).
Page 4
PART LISTING FOR I-258 DRAWING # PART NUMBER DESCRIPTION #713 MOTOR #981C HOPPER #796 LID WITH COTTER #597 GREY IRON BASE FOR I-258 #913 LID SPRING WITH SCREW, WASHER, NUT #501 #831 HERD SURE-FEED BROADCASTER DECAL #504 OPENING PLATE WITH CONNECTING LINKAGE #509 GUIDE ASSEMBLY FOR SEED GATE (2 pairs required) #516...
ADDITIONAL TIPS AND TROUBLE-SHOOTING 1. Causes of packing material in the bottom of hopper: Filling unit at barn then driving to field Using material that has collected moisture from storage, or material being used on extremely damp days. ...
Page 6
CHART FOR BROADCASTING SEEDS - I-258 Seed/Material Opening Size Sows per Acre Width Alfalfa 3/16" 5-1/2# 28 feet Ammonium Nitrate 3/8" 24 feet Australian Pea 3/8" 1 bushel 34 feet Bahia Grass 3/16" 19 # 18 feet Blue Grass 1/2" 9-1/2# 14 feet Brome Grass 1/2"...
Kasco, credit will be issued through the proper channels, distributor and/or dealer. Kasco will not assume liability for any labor costs, loss or damage caused by a defective part, consequential damages, or operational delays. Altering or misuse of a part will void this warranty. Repairing a part without the expressed permission of Kasco voids this warranty.