Table of Contents
Advertisement
8.
Select the Set a static IP Address radio button.
9.
Enter the IP address provided by your system administrator in Step 1 above. Do not check the Remote Device
checkbox.
10. Click on the OK button for the change to take effect.
Note: These instructions change the settings inside the device. If you move the device to a DHCP-enabled network
(i.e., where IP addresses are assigned automatically by a DHCP server or router) you will need to change the device
settings using the Dataq TCP/IP Manager. See the Dataq Instruments TCP/IP Manager help file for complete details.
Installing a DI-789 to a Synchronous Chain on a Distributed Network with a
DHCP Server
Installation of an Ethernet Synchronous chain connected to a distributed network that has a DHCP server (i.e., a
DHCP router automatically assigns IP addresses to each device connected to the network) requires no extra setup.
PC
Your PC
Local Area Network
(LAN)
Ethernet Synchronous Chain
(DI-72x/730/78x)
Installation
DHCP Router
9
DI-789 Hardware Manual
World Wide
Web
Advertisement
Table of Contents
